Select Category
Hardware & Deck
Seadog 3254121 Triple Threat™ Rod Holder - Surface Mount, Black - 325412-1 - 354-3254121F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. Comes supplied with a surface mount base designed to be fastened directly to the boat. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon. Fasteners not included.
Seadog 325235 Flush Mount Rod Holder & Cap, Investment Cast 316 Stainless - 325235-1 - 354-3252351F1
The unique design of the cast stainless mounting flange accommodates a gasket reducing leakage common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included). This new design has the same liner and cap that is used on the stamped stainless steel rod holder (325175).
Seadog 325190 Side Mount 9" Rod Holder | Formed 316 Stainless | #10 Fastener - 325190-1 - 354-3251901F1
Side Mount Rod Holder slides in and out of mounting plate for a lower profile with not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16". Installs with four #10 FH fasteners (not included).
Seadog 325161 Plastic Flush Mount Rod Holder, Flat Dark Earth - 325166-1 - 354-325161F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 3251601 Plastic Flush Mount Rod Holder, Black - 325160-1 - 354-3251601F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 3251231 Side Mount Rod Holder, Flat Dark Earth - 325123-1 - 354-3251231F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251211 Side Mount Rod Holder, White - 325121-1 - 354-3251211F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251201 Side Mount Rod Holder, Black - 325120-1 - 354-3251201F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3250341 Triple Threat™ Three Pole Rod Holder, Flat Dark Earth - 325034-1 - 354-3250341F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250331 Triple Threat™ Three Pole Rod Holder, Black - 325033-1 - 354-3250331F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250321 Triple Threat™ Three Pole Rod Holder, White - 325032-1 - 354-3250321F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 322620 Sand Cast Brass Chrome Plated Folding Step | #12 Fastener - 322620-1 - 354-3226201F1
Sand cast brass folding step with chrome plated finish. Use #12 fastener.
Seadog 322150 Anchor Chock - Fits 5 To 20 Lb Anchors - #10 Fastener - 322150-1 - 354-3221501F1
Anchor Chocks help protect the surface of your deck in rough seas or while the boat is underway. Secures the anchor when not in use while still maintaining easy access. Constructed of investment cast 316 stainless steel for durability and corrosion resistance. For use with conventional fluke anchors from 5-20 lbs. Deck mounts with four #10 FH fasteners (not included).
Seadog 322080 Die Cast Brass Chrome Plated Hinged Chain Deck Pipe - #8 Fastener - 322080-1 - 354-3220801F1
Die cast hinged chain pipe with chrome finish. Use #8FH fasteners.
Seadog 322075 Stainless Replacement Cap & Chain - 322075-1 - 354-3220751F1
Replacement Cap & Chain
Seadog 322070 Forged Brass Chrome Plated Chain Deck Pipe With Chain - #8 Fastener - 322070 - 354-322070F1
These Chain Deck Pipes facilitate the storage of anchor lines out of the way below deck, reducing the risk of trip hazards on deck. Chrome plated forged brass construction. Oval deck pipe opening can accommodate a large thimble and line up to 1" in diameter plus the shackle and chain. Chain can remain in slot when the cover is closed. Installs with four #8 FH fasteners (not included).
Seadog 321800 Chain Deck Pipe, Stainless - 321800 - 354-321800F1
Investment cast 316 stainless chain deck pipe. Use #10 fastener.
Seadog 3181109 Performance Anchor Trolley Kit - 318110-9 - 354-3181109F1
The Performance Anchor Trolley Kit features a zig cleat for easy, one-handed adjustability. The durable, one-piece cheek blocks operate silently. Easily unclip the custom designed ring and use the system as a leash. Kit includes: 30' of 3/16" polypro deck line (1), zig zag cleat (1), ring clip (1), cheek blocks (2), nylon pad eyes (6), 10-32 X 3/4" PH machine screws (10), 10-32 Nyloc nuts (10), #10 flat washers (10), and well nuts (10).
Seadog 318018 Folding Grapnel Anchor, 18 Lbs. A: 1/2", B:22-1/2", C:5", Boat Length: 18' - 26' , Line/Length: 3/8"/150' Anchor, Chain Length: 1/4"/10'-20' - 318018 - 354-318018F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318009 Folding Grapnel Anchor, 9 Lbs A:1/2" , B:18", C:4-1/4". Boat Length: 5'-18', Line/Length:5/16"/120', Chain Length: 3/16"/10'-13' - 318009 - 354-318009F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318007 Folding Grapnel Anchor, 7 Lbs. A:1/2" , B:16", C:4-1/4", Boat Length: 5'-16', Line/Length:5/16"/50', Chain Length: 3/16"/7'-10' - 318007 - 354-318007F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318005 Folding Grapnel Anchor, 5.5 Lbs. Anchor, A:1/2" , B:14", C:4", Boat Length: 5'-14' , Line/Length:5/16"/50', Chain/Length: 3/16"/7'-10' , - 318005 - 354-318005F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318003K11 Folding Anchor Kit - Economy - 318003K1-1 - 354-318003K11F1
Economy Folding Anchor Kit includes everything you need to get started. It comes complete with our popular 3.5 lb. folding anchor, 20' of 3/16" line and a handy mesh bag. Constructed of hot dipped galvanized iron with forged flukes. For boats 5'-12' in length.
Seadog 318003K Folding Anchor Kit - Includes Adjustable Float & Stainless Fast Eye Boat Snap - 318003K - 354-318003Kf1
The Folding Anchor Kit features a 3.5 lb. painted hot dipped, galvanized folding grapnel anchor with 25' of 1/4" line, an adjustable float, stainless fast eye boat snap, and storage bag. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats. Inexpensive and easy to store they are also useful as a backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions..
Seadog 314272 Cast Iron River Anchor, Black Vinyl Coated, 13 Lbs. - 314272 - 354-314272F1
Designed specifically for river currents and heavy drift conditions, river anchors are ideal for pontoon and bass boats. The grappling action of the anchors three individual blades offers effective holding power for rivers and mud bottom lakes, even on windy days. The flow-through holes between the blades facilitate easy retrieval. One-piece cast iron construction.
