Select Category
Hardware & Deck
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26417 - 241-26417F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 3" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26403 - 241-26403F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2-1/4" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26401 - 241-26401F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ Square holes.
Tie Down Engineering Dock Hardware - Inside Corner 10-1/2"L X 5"H With 2-1/4" Elongated Holes And Larger Brace, Commercial Grade - 26424 - 241-26424F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 10-1/2"L x 5"H w/ 2-1/4" holes & larger brace.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24292 - 241-24292F1
Commercial grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 5".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24289 - 241-24289F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24287 - 241-24287F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Heavy Duty Piling Hoop, Commercial Grade - 26412 - 241-26412F1
Commerical grade. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26535 - 241-26535F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26534 - 241-26534F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Heavy Duty Hot Dipped Galvanized 6" Roller Assembly, Commercial Grade - 26414 - 241-26414F1
Commercial heavy duty roller assembly. Bracket and roller bolt directly to the deck plate (26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. Size: 10-1/2" x 2".
Tie Down Engineering Dock Hardware - Heavy Duty 4" X 6" Deck Plate, Commercial Grade - 26416 - 241-26416F1
Heavy duty deck plate for use with Piling Hoop. This 3/16" thick 4"x 6" x 22" plate can be bolted from the top and side of the dock. The hoop can then be bolted to the deck plate, allowing it to be removed seasonally.
Tie Down Engineering Dock Hardware - Galvanized Inside Rolling Ramp Bracket Includes Left And Right Ramp Brackets, Commercial Grade - 26431 - 241-26431F1
5" x 11" x 1/4" galvanized steel bracketIncludes left and right ramp brackets
Tie Down Engineering Dock Hardware - Galvanized Hex Head Bolt Set 3/4" X 3-1/2" (8 Per Bag) - 24279 - 241-24279F1
Standard grade. Includes lock nut. Used to connect male and female connectors. Galvanized 3/4" x 3-1/2".
Tie Down Engineering Dock Hardware - Chain Retainer, Commercial Grade - 26410 - 241-26410F1
Commercial grade. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H.
Tie Down Engineering Dock Hardware - Backing Plate/Hurricane Strap, Standard Grade - 26369 - 241-26369F1
Standard grade for use with Piling Hoops. Size: 2" x 18" x 7 ga.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26527 - 241-26527F1
Standard grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26422 - 241-26422F1
Commercial grade. Should be used for all cross supports. Each leg 2-3/4"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26406 - 241-26406F1
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26399 - 241-26399F1
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 2-1/2"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26398 - 241-26398F1
Commercial grade. Should be used for all cross supports. Each leg 3"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26397 - 241-26397F1
Commercial Grade. Should be used for all cross supports. Each leg 4"L x 8"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26392 - 241-26392F1
Commerical grade. Should be used for all cross supports. Each leg 2-3/4"L x 2-1/2"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26380 - 241-26380F1
Commercial grade. Should be used for all cross supports. Each leg 4"L x 7"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26379 - 241-26379F1
Commercial grade. Should be used for all cross supports. Each leg 10"L x 3"H", 3 holes.
