Docking & Fendering
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22172 - 32-22172F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22171 - 32-22171F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22170 - 32-22170F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1018 - 32-1018F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1016 - 32-1016F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1015 - 32-1015F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Tidy-Ups Fender Adjuster Kit - 1133 - 32-1133F1
Tidy-Ups™ Kits include (1) Tidy-Ups™ Fender Adjuster and (6) feet of 3/8" solid braid polypropylene rope. Made from high quality marine grade components, they are quick and easy to use. Simply snap adjuster over your lifeline, railing, or stanchion and set fender height in an instant. It will not fade or kink, and is mildew and rot resistant. A pre-spliced and professionally finished end allows your fender to be tightly secured without hard-to-untie knots.
Taylor Tidy-Ups Fender Adjuster Kit - 1131 - 32-1131F1
Tidy-Ups™ Kits include (1) Tidy-Ups™ Fender Adjuster and (6) feet of 3/8" solid braid polypropylene rope. Made from high quality marine grade components, they are quick and easy to use. Simply snap adjuster over your lifeline, railing, or stanchion and set fender height in an instant. It will not fade or kink, and is mildew and rot resistant. A pre-spliced and professionally finished end allows your fender to be tightly secured without hard-to-untie knots.
Taylor T3C Mooring Collar - 33028 - 32-33028F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor T3C Mooring Collar - 33025 - 32-33025F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor T3C Mooring Collar - 33020 - 32-33020F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46375 - 32-46375F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46374 - 32-46374F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46372 - 32-46372F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46371 - 32-46371F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46370 - 32-46370F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Stepsafe Single Tread Dock Step 22" L X 18" W X 11.5" H - White With Black Non-Slip Pad - 47100 - 32-47100F1
Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2" wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 29'-33' - Mw.160 - 32-Mw160F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 24'-28' - Mw.140 - 32-Mw140F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 20' - Mw.080 - 32-Mw080F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 18'-23' - Mw.120 - 32-Mw120F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Sd2458B Super Duty Inflatable Yacht Fender, 24" X 58", Black - Sd2458B - 32-Sd2458Bf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd2442B Super Duty Inflatable Yacht Fender, 24" X 42", Black - Sd2442B - 32-Sd2442Bf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd1842N Super Duty Inflatable Yacht Fender, 18" X 42", Navy - Sd1842N - 32-Sd1842Nf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd1842B Super Duty Inflatable Yacht Fender, 18" X 42", Black - Sd1842B - 32-Sd1842Bf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
