Docking & Fendering
Taylor 9035 Fleece Fender Boots For Center Rope Tube Fenders, 8" X 20", Navy - 9035 - 32-9035F1
The ultimate in hull protection. Constructed of 100% polyester 12 oz. blizzard fleece. This ultra soft boot will not mar your boats gel coat. Reinforced brass grommet on the bottom and an adjustable tie on the top for a snug fit. Sold individually.
Taylor 9032 Fleece Fender Boots For Center Rope Tube Fenders, 10" X 26", Black - 9032 - 32-9032F1
The ultimate in hull protection. Constructed of 100% polyester 12 oz. blizzard fleece. This ultra soft boot will not mar your boats gel coat. Reinforced brass grommet on the bottom and an adjustable tie on the top for a snug fit. Sold individually.
Taylor 9031 Fleece Fender Boots For Center Rope Tube Fenders, 8" X 20", Black - 9031 - 32-9031F1
The ultimate in hull protection. Constructed of 100% polyester 12 oz. blizzard fleece. This ultra soft boot will not mar your boats gel coat. Reinforced brass grommet on the bottom and an adjustable tie on the top for a snug fit. Sold individually.
Taylor 90° Vinyl Corner Bumper 6" X 6" - White - 46015 - 32-46015F1
This 90° corner (outside) will protect your boat from this critical point. Inside structural ribs provide the impact resistance you need while it's flush fit side sections give your installation the "finished" appearance. Extrusions fit flush with 90° cut. Inside dimensions cover 6" each side.
Taylor 71034 Big B Inflatable Fender, 12" X 34", Black Onyx - 71034 - 32-71034F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 71032 Big B Inflatable Fender, 10" X 26", Black Onyx - 71032 - 32-71032F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 71028 Hull Gard Inflatable Fender, 8-1/2" X 27", Black Onyx - 71028 - 32-71028F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 71026 Big B Inflatable Fender, 8" X 20", Black Onyx - 71026 - 32-71026F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 71025Sr Sea Ray Big B™ Inflatable Fender, 6 X 15", Black - 71025Sr - 32-71025Srf1
Featuring the Sea Ray logo on every fender, the pearlescent color mixes for our fenders closely matches the most popular colors used in Sea Ray's gelcoats and trim. Now you can select from these vibrant fender colors to perfectly match your boat.
Taylor 71025 Big B Inflatable Fender, 6" X 15", Black Onyx - 71025 - 32-71025F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 71024 Hull Gard Inflatable Fender, 10-1/2" X 30", Black - 71024 - 32-71024F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 601028 Hull Gard Inflatable Fender, 8-1/2" X 27", Gold - 601028 - 32-601028F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 601026 Big B Inflatable Fender, 8" X 20", Sand - 601026 - 32-601026F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 601023 Hull Gard Inflatable Fender, 6-1/2" X 23", Gold - 601023 - 32-601023F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 601022 Hull Gard Inflatable Fender, 5-1/2" X 20", Gold - 601022 - 32-601022F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 571034 Big B Inflatable Fender, 12" X 34", Captain'S Navy - 571034 - 32-571034F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 571032 Big B Inflatable Fender, 10" X 26", Captain'S Navy - 571032 - 32-571032F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 571028 Hull Gard Inflatable Fender, 8-1/2" X 27", Captain'S Navy - 571028 - 32-571028F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 571026 Big B Inflatable Fender, 8" X 20", Captain'S Navy - 571026 - 32-571026F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 571025 Big B Inflatable Fender, 6" X 15", Captain'S Navy - 571025 - 32-571025F1
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Taylor 571024 Hull Gard Inflatable Fender, 10-1/2" X 30", Captain'S Navy - 571024 - 32-571024F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 571023 Hull Gard Inflatable Fender, 6-1/2" X 23", Captain'S Navy - 571023 - 32-571023F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 571022 Hull Gard Inflatable Fender, 5-1/2" X 20", Captain'S Navy - 571022 - 32-571022F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 551023 Hull Gard Inflatable Fender, 6-1/2" X 23", Red - 551023 - 32-551023F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
Taylor 551022 Hull Gard Inflatable Fender, 5-1/2" X 20", Red - 551022 - 32-551022F1
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.
