Lines & Rigging
Seachoice 3" Swivel Eye Bolt Snap - 36491 - 50-36491F1
Swivel Eye Bolt Snap, Chrome/Brass
Seachoice 19176 Multi-Purpose Strap Wrench Set - 19176 - 50-19176F1
Includes one large (24" / 60 cm) and one small (20" / 50 cm) strap wrenchDurable non-slip industrial strength rubber strap for durabilityFlexible strap fits any shapeAdaptable and easy to operate in confined areasNon-marringComfort grip for extra controlLarge wrench range: 1" to 6-1/2" (25 to 165 mm) in diameterSmall wrench range: 3/8" to 5-1/4" (10 to 133 mm) in diameterVersatile©use on automobiles, tractors, home applications and more
Seachoice 144-Piece Canvas Snap Kit With Tool, For Boat Covers And Tonneau Covers - Rp-Kp7262Sc - 50-59444F1
This Seachoice 144-Piece Snap Kit equips you to replace or install reliable snaps in boating canvas such as boat covers, tonneau covers, and upholstery. The premium-grade, nickel-plated brass snap hardware will deliver durability, reliable long-term performance, and a lasting, appealing finish. The snaps come in a container that makes them easy to access during installation. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Large selection of reliable snaps makes it easy to replace or install canvas snapsPremium-grade snap construction ensures reliable long-term performanceNickel-plated brass snaps can withstand long-term exposure to harsh conditionsVersatile snaps can be installed in canvas covers, tonneau covers and upholstery as neededConvenient container makes it easy to access snaps during installationManufacturer part number 50-59444
Sea-Dog Xxx Ss Midget Vent, 2-1/4" - 331370-1 - 354-3313701F1
Stainless steel midget clam shell vents Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Sea-Dog Xxx Ss Midget Vent, 1-5/8" - 331360-1 - 354-3313601F1
Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 5/8" - 181116 - 354-181116F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 3/8" - 181110 - 354-181110F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 1/2" - 181112 - 354-181112F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Utility Cordage, 5/32" X 50' - 303304050-1 - 354-3033040501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 3/16" X 50' - 303305050-1 - 354-3033050501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 1/8" X 50' - 303303050Wh-1 - 354-303303050Wh1F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Outboard Motor Safety Cable - 371599-1 - 354-3715991F1
Vinyl coated galvanized steel wire.Comes complete with Sea Dog #156060 snap hook.
Sea-Dog Line 916001Inl "The Inland Spinner" Display - 916001-Inl - 354-916001Inlf1
Focus is on Freshwater or Inland Boating. 168 SKUs Merchandisers are available complete with product, back tags, sign, display panel and peg hooks completely set up in a box. A planagram version (P) without plastic panel and peg hooks may also be ordered at a lower cost. Panel dimensions are 16" x 24", 2 panels per side plus 4" for header card. Panels fit Sea-Dog® spinners. Spinner Base with Casters sold separately.
Sea-Dog Line 4203905 2 Position On-Off Switch, 25 Pieces In A Fishbowl Display - 420390-5 - 354-4203905F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4203901 2 Position On-Off Switch - 420390-1 - 354-4203901F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4201011 Toggle Switch (Spst) - On/Off - 420101-1 - 354-4201011F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Sea-Dog Line 2224151 Ring Pull, Cast Brass, A:2-1/2" , B:2", C:3/16", D:1/8", E:1-1/2", #8 Fh - 222415-1 - 354-2224151F1
Constructed of sand cast brass, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use. Installs with four #4 FH fasteners (not included).
Sea-Dog Kill Switch 7 Key Universal Lanyard - 420495-1 - 354-4204951F1
This marine emergency cut-off 7 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50" lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.
Sea-Dog Kill Switch 10 Key Universal Lanyard - 420496-1 - 354-4204961F1
This marine emergency cut-off 10 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 10 key 50" lanyard fits Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Kawasaki, OMC, and Nissan kill switches.
Sea-Dog Illuminated Toggle Switch, On/Off/On - 420118-1 - 354-4201181F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Illuminated Toggle Switch, On/Off - 420111-1 - 354-4201111F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Galvanized Shackle-Load Rated , A:7/8" , B:1-1/4, C:2", D:2-3/4", Max Load: 4-3/4 Ton - 147619 - 354-147619F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are load rated.
Sea-Dog Dual Power Socket - 426130-1 - 354-4261301F1
Stamped brass/plastic. Dual Power Socket allows two separate 12 volt devices to be operated at the same time using a power socket or cigarette lighter. Has internal 10 amp fuse. LED indicator light. 12 volt, sockets rated at 5 amps each.
Sea-Dog Boat Hook / Paddle Clip - 491361-1 - 354-4913611F1
This one-piece Boat Hook/Paddle Clip allows for the simple, one handed storage of your boat hook or paddle. Features leash attachment points for securing a paddle leash. Anti-snag ramps prevent line from getting stuck under the clip when not in use. Constructed of UV stabilized injection molded nylon.
Sea-Dog Alligator Clips, Pr. - 426470-1 - 354-4264701F1
Alligator Clips are constructed of chrome plated steel. This pair of long, spring-loaded, serrated jaw Alligator Clips are used for creating temporary electrical connections. Color coded to avoid polarity misidentification. Includes one positive and one negative battery clip. 10A max.
