Lines & Rigging
Seadog 5010723 Premium Electric Oil Pump, 12V - 501072-3 - 354-5010723F1
This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48" inlet and 80" outlet hoses. Oil flow 0.2 liters per minute. Diesel flow 1.5 liters per minute. 12VDC. 60W. Maximum run time 30 minutes.NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids.
Seadog 502150H1 Lower Unit Standard Pump - 502150H-1 - 354-502150H1F1
Nylon/aluminum. Standard Pump fits quart oil bottles. Flexible hose gets to hard to reach locations. Threaded (3/8"-16) fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (70hp & up), Volvo, Force, Mercury (US origin models) and Gamefisher lower units. Includes Yamaha adapter (8mm-1.25) fitting for Mercury (Japanese origin models), Yamaha, Nissan, Tohatsu, Honda.
Seadog 520060 Captive Garboard Drain & Plug | #8 Fastener | Investment Cast 316 Stainless - 520060 - 354-520060F1
This Captive Garboard Drain & Plug is a direct replacement for the bronze, traditional style Sea-Dog® Garboards (520040 and 520042). Captive plug prevents plug from being lost. Constructed of investment cast 316 stainless steel. Installs with three #8 FH fasteners (not included).
Seadog 521550 Telescoping 15-1/2" To 24-1/2" Inboard Motor Flusher - Molded Rubber & Aluminum - 521550-1 - 354-5215501F1
Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine's service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an inboard engine out of the water.
Seadog 5216301 Motor Well Boot, 3" W/Ring - 521630-1 - 354-5216301F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 5216551 Motor Well Boot, 5-1/2" - 521655-1 - 354-5216551F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 521663-1 Motor Well Boot - 4-1/8" Split - 521663-1 - 354-5216631F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 521664-1 Motor Well Boot - 5-1/2" Split - 521664-1 - 354-5216641F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 563255 Cast 17-4Ph Grade Stainless Adjustable Wrench - Includes 1/4" Hex Head & Bottle Opener - 563255-1 - 354-5632551F1
Stainless steel adjustable wrench is made to last a lifetime under any conditions. Includes, 1/4" hex head and bottle opener. Cast 17-4ph stainless.
Seadog 5805701 Brass Round Horn Oarlocks, Pr. - 580570-1 - 354-5805701F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805901 Brass Round Horn Oarlocks, Pr. - 580590-1 - 354-5805901F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805911 Brass Round Horn Oarlocks, A: 1/2" B: 2-1/8" - 580591-1 - 354-5805911F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5806001 Brass Oarlock Sockets, Top Mt., Pr. - 580600-1 - 354-5806001F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806101 Brass Oarlock Sockets, Side Mt., A:1/2" B: 3-5/8" - 580610-1 - 354-5806101F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806201 Bronze Angle Mount Oarlock Socket, A: 1/2" C:1-1/16" - 580620-1 - 354-5806201F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 588060 Flush Mt Drink Holder Combo Black - 588060 - 354-588060F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 588061 Flush Mt Drink Holder Combo White - 588061 - 354-588061F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 604080 It Floats™ - Locking Winch Handle, 8" - 604080 - 354-604080F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 604100 It Floats™ - Locking Winch Handle, 10" - 604100 - 354-604100F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 6714601 Hammock Hooks - Stainless, 2/Cd - 671460-1 - 354-6714601F1
Hammock Hooks are designed with an extra bend for additional holding power. Ideal for fender and lashing hook applications. Corrosion resistant stamped 304 stainless steel construction. Installs with two #6 FH fasteners (not included).
Seadog 7271303 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727130-3 - 354-7271303F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271323 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727132-3 - 354-7271323F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271353 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727135-3 - 354-7271353F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271373 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White - 727137-3 - 354-7271373F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271403 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727140-3 - 354-7271403F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
