Lines & Rigging
Two Pole Rod Storage Rack, Black - 325029-1 - 354-3250291F1
Constructed from one-piece of injection molded UV stabilized polypropylene. Holds rods up to 1-3/4" in diameter. Includes four #8 stainless steel mounting screws. Has a built-in knife and lure holder.
Ufp Thermoplastic Add-On Brakeline Kit - K71-112-00 - 445-K7111200F1
Unlike other flexible brake lines, UFP's Non-Corrosive Thermoplastic brake lines have an extremely low expansion rate which delivers higher braking pressures for decreased stopping distances. Working Pressure 3,000 PSIBrass Fittings for corrosion resistanceThermoplastic lines meet all FMVSS 106 RequirementsKit Includes: (1) 101" Thermoplastic Brake Line and (1) 54" Thermoplastic Brake Line
Ufp Thermoplastic Brakeline Kit, Dual Axle - K71-111-00 - 445-K7111100F1
Unlike other flexible brake lines, UFP's Non-Corrosive Thermoplastic brake lines have an extremely low expansion rate which delivers higher braking pressures for decreased stopping distances. Working Pressure 3,000 PSIBrass Fittings for corrosion resistanceThermoplastic lines meet all FMVSS 106 RequirementsKit includes: brake lines, banjo fittings, banjo bolts and copper washers
Ufp Thermoplastic Brakeline Kit, Single Axle - K71-110-00 - 445-K7111000F1
Unlike other flexible brake lines, UFP's Non-Corrosive Thermoplastic brake lines have an extremely low expansion rate which delivers higher braking pressures for decreased stopping distances. Working Pressure 3,000 PSIBrass Fittings for corrosion resistanceThermoplastic lines meet all FMVSS 106 RequirementsKit includes: brake lines, banjo fittings, banjo bolts and copper washers
Universal Deck Plate Key - 335690-1 - 354-3356901F1
Universal Deck Fill Key is constructed of corrosion resistant stamped 304 stainless steel. Fits all Sea-Dog® fuel fills as well as most other competitors fills. A multi-purpose tool that also functions as a shackle key, bottle opener, straight blade screwdriver, plus 5/16", and 7/16" hex head wrenches.
Universal Kill Switch - 420498-1 - 354-4204981F1
The marine emergency cut-off Universal Kill Switch attaches to your life vest while operating a boat or personal watercraft and is designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 1/4" brass terminals. The switch includes a lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Universal Line Release - 2250009 - 627-2250009F1
Mount Cannon's portable, packable Mini-Troll to a canoe, jon boat, sailboat, or virtually any craft. Mini-Troll's tough Lexan™ frame and low profile design make it ideal for fly-ins and float trips. Pre-spooled with 100 ft./120-lb test rugged stainless steel cable. Horizontal manual reel/brake. Built-in 2 1/2" C-clamp base. 4 lb weight capacity. Limited Lifetime Warranty.
Valvtect Mar Gasoline 2.5G @2 Additive Gas - Vmga2.5 - 93-Vmg25F1
Valvtect Marine Gasoline 55G Additive Gas - Vmga55 - 93-Vmg55F1
Ventadome Dome Smoke Old Style Rounded Dome Replaces P/N 312-Bv05540310 - Bv0554-03 - 312-Bv055403F1
Ventadome Dome Wht Old Style Rounded Dome Replaces P/N 312-Bv05540110 - Bv0554-01 - 312-Bv055401F1
Ventline® Bva031200 6-1/2" Fan Blade - Bva0312-00 - 312-Bva031200F1
Used on the following products:V2062, V2263, V2044, V2244, V2045, V2245, V2015, V2215. Fits shaft .214 dia. CW
Ventline® Bvd021800 12 Volt Motor Kit - Bvd0218-00 - 312-Bvd021800F1
This kit replaces VD0218 and older VA0164 and VC0468 12V motors used in Ventline's standard roof ventadomes and range hoods. Included in the kit is the VD0218 motor, motor lead wires, screws, instruction sheet and a drill template to retro fit the VD0218 motor to the brackets used with older motors.
Ventline® Bvd02180020 12 Volt Motor Kit - Bvd0218-00-20 - 312-Bvd02180020 Superseded By: 312-Bvd021800F1
This kit replaces VD0218 and older VA0164 and VC0468 12V motors used in Ventliney®'s standard roof ventadomes and range hoods. Included in the kit is the VD0218 motor, motor lead wires, screws, instruction sheet and a drill template to retro fit the VD0218 motor to the brackets used with older motors.
Ventline® Bvd027800 120 Volt Motor Kit - Bvd0278-00 - 312-Bvd027800 Superseded By: 312-Bcd02780004F1
Used on range hoods, roof vents, ceiling fans, sidewall vents and attic ventilators
Ventliney® Plastic Plumbing Vents For 1-1/2" Vent Pipe, Colonial White - V2049-03 - 312-V204903F1
Durable polyethylene with chimassorb for ultraviolet ray protection Two piece constructionAccommodates maximum 6/12 pitch roofsFlange has mounting holes and a wipe seal featureRemovable cap snaps on and securely fastens to flange with screw (not included)
Ventliney® Plastic Plumbing Vents For 1-1/2" Vent Pipe, White - V204901 - 312-V204901F1
Durable polyethylene with chimassorb for ultraviolet ray protection Two piece constructionAccommodates maximum 6/12 pitch roofsFlange has mounting holes and a wipe seal featureRemovable cap snaps on and securely fastens to flange with screw (not included)
Verna-Ski Inline Ski Boat Muffler, 45 Degree - 1000265 - 383-1000265F1
It is designed to fit in your boat for quick easy installation. Available in straight or 45° angled inlet. For use above the waterline.
Vibration Activated Hour Meter - Hr8065 - 328-Hr8065F1
Track the service life of all non-engine applications - automatic vibration activated recordingNo power required - sealed waterproof lifetime batteryPreventative maintenance - bearings, lubrication, etcAutomatic roll-overResolution 0.1 hourEasy installation - No wiring needed, peel & stick or use included hardwareRecords to 9,999.9 hoursHour glass symbol appears and flashes on/off to indicate counting time100% epoxy encapsulated case resists waterOne year warranty
Vintage Traditional 3-Strand Polyester Line, 1/2" X 600' - 7000-16-00600 - 325-70001600600F1
The perfect compliment for the traditional vessel. Low stretch running rigging. Excellent abrasion resistance with low stretch and high strength. Easy to splice. Use on dinghies, traditional boats, halyards and control lines.
Vintage Traditional 3-Strand Polyester Line, 3/8" X 600' - 7000-12-00600 - 325-70001200600F1
The perfect compliment for the traditional vessel. Low stretch running rigging. Excellent abrasion resistance with low stretch and high strength. Easy to splice. Use on dinghies, traditional boats, halyards and control lines.
Vintage Traditional 3-Strand Polyester Line, 5/8" X 600' - 7000-20-00600 - 325-70002000600F1
The perfect compliment for the traditional vessel. Low stretch running rigging. Excellent abrasion resistance with low stretch and high strength. Easy to splice. Use on dinghies, traditional boats, halyards and control lines.
