Rails, Ladders & Seating
Seachoice 52021 Foldup Boat Trailer Jack, 6" Wheel, 1,000 Lbs. Max Load - 50-52021 - 50-52021F1
Swings from vertical position to horizontal during transportationSpring loaded latch locks and releases the jack from one position to the otherBolt-on designIncludes all mounting hardwareFits up to 3" x 4" trailer frame1,000 Lbs. max load22-7/8" Extended height; 10" of travel
Seachoice 360 Degree Seat Swivel - 78400 - 50-78400F1
360° swivel. Cadmium plated frame with 6 ball bearings-200 lb. capacity. Specially designed for padded seats. Base and seat hole pattern are adjustable from 4-3/4" to 5-3/4" on centers.
Seachoice 28003 Adjustable Transom Saver, 34" - 46" - 50-28803 - 50-28003F1
Aluminum constructionUniversal mountAdjustable from 34" to 46"Includes: Clevis pin, over-the-roller bracket, wing and bolt on brackets and two rubber straps
Seachoice 28001 Adjustable Transom Saver 20-30" - 50-28001 - 50-28001F1
This dependable Seachoice Adjustable Transom Saver helps support the weight of your outboard motor while trailering to prevent damage to the motor or to your boat's transom. It can be used with all outboard motors. (Power tilt and trim are required to use this unit.) This Adjustable Transom Saver absorbs the shock and energy transmitted from the trailer while on the road. This device helps keep the motor in a fixed position to prevent unwanted impacts. This Transom Saver features Stainless Steel components that can withstand the rigors of saltwater exposure. And it's adjustable to lengths from 20-30 inches. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Must have power tilt and trim to use unitFits all outboard motorsAdjustable from 20" to 30"For saltwater and freshwater useContains stainless steel hardware©hooks, bolts and nutsMade in USA
Seachoice 18331 Adjustable Inboard Engine Flusher - 50-18331 - 50-18331F1
The Seachoice Adjustable Inboard Engine Flusher flushes sand, silt, and alkali from your inboard motor. It features a telescoping shaft for precise alignment, especially in hard-to-reach areas. The large diameter suction cup eliminates fall-off or blow-by while flushing.Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Designed to flush sand, silt, and alkali from your inboard engineEasily installs on raw water strainer for inboard engines without toolsTelescoping shaft ensures precise alignment, especially in hard-to-reach areasShaft length: 18-1/2" to 31"Large diameter suction cup eliminates fall-off or blow-by while flushing
Seachoice 13951 Trailer "Y" Harness, 50', 12/24V, 10 Amp - 50 - 50-13951F1
Flat - 4 Pole. Consists of 48" vehicle side connector and 18-ga. color-coded wires. Marine-grade tinned copper. Trailer side split to allow routing of wire down both sides of trailer for easy hook-up. 13941 & 13961: Includes 6 frame straps, 2 quick-splice connectors13951: Includes 12 frame straps, 4 quick-splice connectors
Sea-Lect K747100B1 Kayak Adjustable Footbrace, Standard Flag, A:20-1/4", B:4-1/4", C:14-1/2", Black - K747100B-1 - 680-K747100B1F1
10" of adjustable travel with only the flip of the lever. The two mounting holes (measuring 14-1/2" apart) fit most existing footbrace patterns, and the entire unit is designed to be maintenance free and self-cleaning while maintaining tremendous strength. In addition, Pedals are extremely comfortable. Thru-hole mounting for easy user installation. 10" of adjustable travel with only the flip of the leverThe two mounting holes (measuring 14-1/2" apart) fit most existing footbrace patterns, and the entire unit is designed to be maintenance free and self-cleaning while maintaining tremendous strengthThru-hole mounting for easy user installation.
Sea-Lect Designs Kayak Adjustable Footbrace W/ Rudder Control (Black) - K747200B-1 - 680-K747200B1F1
Offers the same great benefits as its fixed counterpart with the added benefit of rudder control capabilities. One of the easiest footbraces to adjust while on the water. A great kit for adding new footbraces to a kayak, or replacing an old worn-out pair.Ideal for kayak fisherman looking for an easy way to steer their Torqeedo (and/or other outboard motor)A: 20-1/4" / B: 4-1/4" / C: 14-1/2"Footbraces made in the USA (Everett, WA)!
Scotty 362S Adjustable Triple Rod Holder Mount Only - 362 - 736-362Sf1
Fully-adjustable multiple rod holder comes with a built-in lure and accessory rack. The universal triple board design allows for three different post mount attachments, enabling you to drop and lock a Scotty Camera Mount, Fishfinder Mount, Rod Holder, Cup Holder or any Scotty post mounted accessory. A custom holder that mounts up to three different items and is attached from only one mounting point.
Scotty 287 7/8" Round Rail - 287 - 736-287F1
Provides versatile mounting without having to drill more holes in your boat Perfect for boats with limited mounting surfacesIncludes stainless steel fasteners that hold this tough mount securely in placeWorks with all Scotty post mount rod holdersFits 7/8" round rails
Scotty 257 Adjustable Triple Rod Holder Mount W/#241 Side/Deck Mount - 257 - 736-257F1
Fully-adjustable multiple rod holder comes with a built-in lure and accessory rack. The universal triple board design allows for three different post mount attachments, enabling you to drop and lock a Scotty Camera Mount, Fishfinder Mount, Rod Holder, Cup Holder or any Scotty post mounted accessory. A custom holder that mounts up to three different items and is attached from only one mounting point.Includes No. 241 combination deck or side mount.
Scotty 243Bk Rod Holder 1-1/4" Square Rail Mount, Black - 0243-Bk - 736-243Bk Superseded By: 736-0243Bkf1
Fits 1-1/4" square rails Provides versatile mounting without having to drill more holes in your boatPerfect for boats with limited mounting surfacesIncluded stainless steel fasteners hold this tough mount securely in placeWorks with all Scotty post mount rod holders
Scotty 0320 Adaptable Rail Mount - 320 - 736-0320F1
Constructed from the same durable, rugged materials our brand is famous for, and designed with versatility in mind, the 320 can be positioned almost anywhere along a 2" rail. Includes a pair of inserts for both 1-1/2" round rails, and the 1-1/4" square rails found on many pontoon boats. Corrosion-resistant fasteners are supplied. Also includes the 241 Side Deck Mount, which accommodates a vast range of Scotty rod holders and accessories.
Scanstrut Rokk Mini Adjustable Body Only - Rls-Am - 922-Rlsamf1
ROKK Mini is a compact and multi-adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras and more! Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech on board. No compromise. VERSATILE - A choice of base mounts to install your devices how you want, where you want MORE THAN A MOUNT - Designed, not just made. With features that you'll feel and hear more than you'll see QUICK FIT / QUICK RELEASE - Install your devices instantly on board. With one reassuring click your tech is both secured and released SOLID INSTALL - A metal-on-metal locking system multiplies your clamping efforts to achieve 100% locking force. Your electronics will never move, until you want them to.All ROKK Mini top plates are also compatible with ROKK Midi system.A complete system consists of a Clamp or Top Plate, a Body, and a mount. All 3 components are ordered separately.
Scanstrut Rokk Midi Adjustable Body W/Rail Mount - Rl-Arm - 922-Rlarmf1
A multi-position, fully adjustable mount for small electronic devices onboard. Install fish finders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and more.All ROKK Midi top plates are also compatible with ROKK Mini system.A complete system consists of a top plate and a body w/mount. Both parts are sold separately.
Scanstrut Rokk Midi Adjustable Body W/Deck Mount - Rl-Adm - 922-Rladmf1
A multi-position, fully adjustable mount for small electronic devices onboard. Install fish finders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and more.All ROKK Midi top plates are also compatible with ROKK Mini system.A complete system consists of a top plate and a body w/mount. Both parts are sold separately.
Rub Rail Restorer W/Ptef® - 86716 - 74-86716F1
Rejuvenates dull, weathered rub rails; covers up scuff marks PTEF® polymers bond to treated surface to help repel stains and damaging UV raysRestores long-lasting shine and beauty in secondsFormulated to keep all black and colored rub rails looking greatIdeal for use on all rubber, plastic trim and car or trailer tires
Rub Rail Kit W/Chr Insert 70' - V11-9811Wcm70-2 - 236-V119811Wcm702F1
Flexible and Durable. Continuous coil allows for one piece installation without seams. Tight radius bending can be made with minimal heating. Boxed and coiled in a convenient carry-out box. Screws and End Caps included.
Rub Rail Kit Black 70' - V11-0809Bbk70-2 - 236-V110809Bbk702F1
All-in-One Kit Includes:Flexible vinyl rub rail, insert and end caps along with screws and an installation guide with helpful hints on installing rub rail. Soft durometer rub rail provides a cushion effect to absorb impact. Continuous coil for one-piece, seamless installation. Packaged coiled in a carry out, UPS compliant box.
Rub Rail Kit Black 50' - V11-0809Bbk50-2 - 236-V110809Bbk502F1
All-in-One Kit Includes:Flexible vinyl rub rail, insert and end caps along with screws and an installation guide with helpful hints on installing rub rail. Soft durometer rub rail provides a cushion effect to absorb impact. Continuous coil for one-piece, seamless installation. Packaged coiled in a carry out, UPS compliant box.
Rub Rail End Caps 2/Cd - F90-0002Bkn-1 - 236-F900002Bkn1F1
Caps rub rail to finish end of rail and ensure inserts stay intact. # 8 screws.F900002 fits rub rail V11-3447, V21-9659, V21-9722.F900001 fits rub rail V11-2423 ,V11-3426.
Rub Rail Alum. 1-5/16" X12' L - A12-0303Bly12D - 236-A120303Bly12Df1
Accepts flexible insert. Designed for use with flexible vinyl inserts. Easy tight radius bending as well as providing strength and protection. Anodized finish to protect against the harsh marine environment. 5-year warranty. Insert not included. Models with a "D" sffix are drilled and countersunk.
Rub Rail Alum. 1-1/8" X12' L - A11-0347Bly12D - 236-A110347Bly12Df1
Accepts flexible insert. Designed for use with flexible vinyl inserts. Easy tight radius bending as well as providing strength and protection. Anodized finish to protect against the harsh marine environment. 5-year warranty. Insert not included. Models with a "D" sffix are drilled and countersunk.
Rod Saver 2Pb4Vp 2" X 4' Paddle Buckle Trailer Tie Down W/Vinyl Pad - 2Pb4Vp - 344-2Pb4Vpf1
This 2" x 4' popular tie-down system is made with a 2 paddle buckle, polypropylene belt and protective pad with hook and loop closure and vinyl pad for additional boat protection. It features American made heavy vinyl coated top hook and zinc plated bottom hook.
Rod Saver 2Pb4 2" X 4' Paddle Buckle Trailer Tie Down - 2 Pb 4 - 344-2Pb4F1
This 2" x 4' popular tie-down system is made with a 2 paddle buckle, polypropylene belt and protective pad with hook and loop closure for boat protection. It features American made heavy vinyl coated top hook and zinc plated bottom hook.
