Select Category
Maintenance & Protection
Wood Finishing Pad - 7415 - 71-07415F1
For smoothing bare wood, rubbing in furniture oils and denibbing between coats of stain, sealer or varnish. Made from a tough synthetic material that won't rust or splinter like steel wool.Sold in case pack of 10 only.
Wichard 6606 Folding Pad Eye, 10Mm - 6606 - 905-6606F1
Perfect solution for fastening applications (stay, blocks, jib tack point, lifeline, tether etc.). Fully dropforged product with outstanding working and breaking loads regardless the angle of the load. 316L stainless steel.
Wichard 6605 Folding Pad Eye, 8Mm - 6605 - 905-6605F1
Perfect solution for fastening applications (stay, blocks, jib tack point, lifeline, tether etc.). Fully dropforged product with outstanding working and breaking loads regardless the angle of the load. 316L stainless steel.
Wichard 6604 Folding Pad Eye, 6Mm - 6604 - 905-6604F1
Perfect solution for fastening applications (stay, blocks, jib tack point, lifeline, tether etc.). Fully dropforged product with outstanding working and breaking loads regardless the angle of the load. 316L stainless steel.
Wichard 6565 Double Folding Pad Eye, 3-3/16"L W/ 11/16" Eye - 6565 - 905-6565F1
Drop forged from "HR" high resistant stainless steel. Silicon pad to reduce noise and vibrations. Made in France.
White Surfacing Putty - Y257/Pt - 94-257Pf1
Surfacing Putty has a fast drying formula ideally suited for filling fastener holes and shallow gouges. it's also great for fairing up minor surface imperfections on bare wood and fiberglass prior to the application of paint. Sands easily and has good adhesive propertiesHeavy-bodied and dries very quicklyIdeally suited for filling fastener holes, shallow gouges
White Shrink Tape, 3" X 60 Yds. - 1765P - 315-Dt3Bf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
White Gel Coat With Wax Qt - 701490 - 349-701490F1
Use over fiberglass surfaces. Designed to cure to a tack-free finish. Sanding is required between coats where applicable. Contains Wax-Sol. Hardener included.
White Gel Coat With Wax Pt - 701480 - 349-701480F1
Use over fiberglass surfaces. Designed to cure to a tack-free finish. Sanding is required between coats where applicable. Contains Wax-Sol. Hardener included.
White Gel Coat With Wax Gl - 701500 - 349-701500F1
Use over fiberglass surfaces. Designed to cure to a tack-free finish. Sanding is required between coats where applicable. Contains Wax-Sol. Hardener included.
White Gel Coat No Wax Qt W/Hdr - 701440 - 349-701440F1
White exterior Gel Coat used in laminating molded parts. Hardener included. Does not contain wax.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 80C - 051144-02018 - 71-02018F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 60C @50 - 051141-24001 - 71-24001F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 600A - 2000 - 71-02000F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 400A - 2002 - 71-02002F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 320A - 2004 - 71-02004F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 220A - 2007 - 71-02007F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 180C - 051144-02014 - 71-02014F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 150C - 051144-02015 - 71-02015F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 120C - 051144-02016 - 71-02016F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 100C - 051144-02017 - 71-02017F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
West System G/Flex Epoxy Kit, 4 Oz. (2Ea 4 Oz. Bottles) - C-650-K - 655-C650Kf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs. 650-K G/Flex Aluminum Kit: Contains 4 fl. oz. G/Flex 650 resin, 4 fl. oz. G/Flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams adhesive filler, 4 mixing cups, 1pair disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.
West System G/Flex Epoxy Kit, 4 Oz. (2Ea 4 Oz. Bottles) - 650-K - 655-650Kf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.650-K G/Flex Aluminum Repair Kit: Contains 4 fl. oz. G/Flex 650 resin, 4 fl. oz. G/Flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams adhesive filler, 4 mixing cups, 1pair disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.
West System G/Flex Epoxy Bottles, 8 Oz. (2Ea 4 Oz. Bottles) - C-650-8 - 655-C6508F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex Epoxy Bottles, 8 Oz. (2Ea 4 Oz. Bottles) - 650-8 - 655-6508F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
