Select Category
Steering & Controls
Uflex Kitf Hydraulic Helm Remote Fill Kit - Kit F - 216-Kitff1
Allows you to fill the oil in your system more easily from a remote location. Includes all necessary hose and fittings. For use with Tilt or Rear mount pumps.
Uflex K46 Adapter For M47 Steering Cable - K46 - 216-Ultk46F1
Adapter for M47 Steering Cable
Uflex Hytech31 Hytech Hydraulic Steering System - Hytech 3.1 - 216-Hytech31F1
HYTECH is an easy and affordable outboard hydraulic steering solution for boats with up to 175 h.p. The kit features the unique split tilt tube rod that allows for installation of the cylinder without removing the engine. Coupled with the composite UP20 helm, the HYTECH offers effortless steering with 4.5 turns lock-to-lock. Applicable to almost all 2 and 4 stroke outboard engines. Includes: One UP20 helm, One UC95 cylinder, Two quarts of Oil & 40' of cut to length tubing.See engine application chart for more information.
Uflex Hytech11T Hytech Hydraulic Steering System - Hytech 1.1T - 216-Hytech11Tf1
HYTECH is an easy and affordable outboard hydraulic steering solution for boats with up to 175 h.p. The kit features the unique split tilt tube rod that allows for installation of the cylinder without removing the engine. Coupled with the composite UP20 helm, the HYTECH offers effortless steering with 4.5 turns lock-to-lock. Applicable to almost all 2 and 4 stroke outboard engines. Includes: One UP20T-X52 Tilt Helm, One UC95 cylinder, Two quarts of Oil & 40' of cut to length tubing.See engine application chart for more information.
Uflex Hytech11 Hytech Hydraulic Steering System - Hytech 1.1 - 216-Hytech11F1
HYTECH is an easy and affordable outboard hydraulic steering solution for boats with up to 175 h.p. The kit features the unique split tilt tube rod that allows for installation of the cylinder without removing the engine. Coupled with the composite UP20 helm, the HYTECH offers effortless steering with 4.5 turns lock-to-lock. Applicable to almost all 2 and 4 stroke outboard engines. Includes: One UP20 helm, One UC95 cylinder, Two quarts of Oil & 40' of cut to length tubing.See engine application chart for more information.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 8' - Kitobbhbr-08' - 216-Kitobbhbr08F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 6' - Kitobbhbr-06' - 216-Kitobbhbr06F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 5' - Kitobbhbr-05 - 216-Ultobbhbr05F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 30' - Kitobbhbr-30' - 216-Kitobbhbr30F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 28' - Kitobbhbr-28 - 216-Kitobbhbr28F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 26' - Kitobbhbr-26' - 216-Kitobbhbr26F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 24' - Kitobbhbr-24' - 216-Kitobbhbr24F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 22' - Kitobbhbr-22' - 216-Kitobbhbr22F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 20' - Kitobbhbr-20' - 216-Kitobbhbr20F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 18' - Kitobbhbr-18' - 216-Kitobbhbr18F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 16' - Kitobbhbr-16' - 216-Kitobbhbr16F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 14' - Kitobbhbr-14' - 216-Kitobbhbr14F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 12' - Kitobbhbr-12' - 216-Kitobbhbr12F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob-Bhbr Hose Kit Includes Pre-Crimped Brass Fittings, Bulkhead Fittings And Bend Restrictors On Both Ends (2 Per Pack), 10' - Kitobbhbr-10' - 216-Kitobbhbr10F1
Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders. Compatible with Teleflex helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. 2 hoses per kit.
Uflex Hydraulic Ob Hose Kit With Pre-Crimped Brass Fittings And Bend Restrictors On Both Ends (2 Per Pack) - Kitob-30' - 216-Kitob30F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OB hoses have bend restrictors on one end. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Uflex Hydraulic Ob Hose Kit With Pre-Crimped Brass Fittings And Bend Restrictors On Both Ends (2 Per Pack) - Kitob-28' - 216-Kitob28F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OB hoses have bend restrictors on one end. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Uflex Hydraulic Ob Hose Kit With Pre-Crimped Brass Fittings And Bend Restrictors On Both Ends (2 Per Pack) - Kitob-26' - 216-Kitob26F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OB hoses have bend restrictors on one end. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Uflex Hydraulic Ob Hose Kit With Pre-Crimped Brass Fittings And Bend Restrictors On Both Ends (2 Per Pack) - Kitob-24' - 216-Kitob24F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OB hoses have bend restrictors on one end. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Uflex Hydraulic Ob Hose Kit With Pre-Crimped Brass Fittings And Bend Restrictors On Both Ends (2 Per Pack) - Kitob-22' - 216-Kitob22F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OB hoses have bend restrictors on one end. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Uflex Hydraulic Ob Hose Kit With Pre-Crimped Brass Fittings And Bend Restrictors On Both Ends (2 Per Pack) - Kitob-20' - 216-Kitob20F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OB hoses have bend restrictors on one end. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
