Seastar Ha6806 Hardware Kit Only | Use For Hc6845 Tournament Series Triple Engine Dual Cylinder - Ha6806 - 1-Ha6806F1

Hardware Kit

Seastar Ha6804 Hardware Kit Only | Use For Hc6845 Tournament Series Twin Engine Dual Cylinder - Ha6804 - 1-Ha6804F1

Hardware Kit

Seastar Ha6802 Hardware Kit Only | Use For Hc6845 Tournament Series Twin Engine Single Cylinder - Ha6802 - 1-Ha6802F1

Hardware Kit

Seastar Ha6801 Hardware Kit Only | Use For Hc6845 Tournament Series Single Engine Single Cylinder - Ha6801 - 1-Ha6801F1

Hardware Kit

Seastar Ha5822 High Strength Tiller Bolt W/ Nylock Nut 3/8" - Ha5822 - 1-Ha5822F1

SeaStar outboard steering offers three models of steering cylinders to suit most applications: Front Mount, Side Mount, and Splashwell Mount.Front Mount cylinders are balanced and the most commonly used. They are designed for single engines to 350 hp and multiple outboard engine installations with total power to 700 hp in counter rotating applications. Before ordering, determine the best application for the boat based on hull design, speed, and usage.Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.

Seastar Ha5731 Capilano 18" Hose Kit For Copper Tubing (2 Hoses) - Ha5731 - 1-Ha5731F1

Contains two hoses 18" long. For single cylinder applications. Supplied with 1/2" swivel flare nuts on each end. Required of steering systems installed with copper tubing to accommodate slight cylinder movement.

Seastar Ha5477 Grounding Strap For O/B Cylinder - Ha5477 - 1-Ha5477F1

The grounding strap kit is designed to provide added protection against corrosion caused by stray current. This is designed for use on the SeaStar and BayStar front mount outboard cylinders. Included with all new SeaStar front mount cylinders.

Seastar Ha5461 Dual Cylinder Adapter For Power Purge Jr. - Ha5461 - 1-Ha5461F1

The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat - by using Power Purge this can be reduced to 10 minutes or less.Features:Speed, quality, and ease-of-operationExtended portablility for use in the field - weighs only 12 poundsConvenient electrical hook-up utilizing an avail able12-volt boat battery

Seastar Ha5458H Hydraulic Fluid, 5-Gallon Pail - Ha5458H - 1-Ha5458Hf1

SeaStar Hydraulic Steering Fluid is engineered with a proprietary additive package which contains anti-foaming and anti-rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and a water emulsification additive SeaStar Hydraulic Steering Fluid is the ONLY steering fluid which is Validated and Performance Matched to ensure the optimum performance and safety of SeaStar Solutions Hydraulic Steering Systems

Seastar Ha5450 Helm Remote Fill Kit For Capilano Systems - Ha5450 - 1-Ha5450F1

Will facilitate filling and purging of steering system at a more convenient and accessible area than at a helm pump. Contains thru-dash fitting, waterproof vent plug, elbow fittings and 18" of vinyl tube.

Seastar Ha5438 Bleed Hose - Use For Seastar Outboard Steering Kit - Ha5438 - 1-Ha5438F1

Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes: hose with screw cap which fits SeaStar or equivalent oil bottles and push pin for venting/resealing bottle. Allows for clean bleed when used properly.

Seastar Ha4643 Baystar Adapter Plate - Converts Hc4645H To Hc4658H - Ha4643 - 1-Ha4643F1

Kit - Changes HC4645 Into HC4658 for J/E 40-140 HP 4-Stroke

Seastar Ha4642 Baystar Adapter Plate - Converts Hc4645H To Hc4648H - Ha4642 - 1-Ha4642F1

Kit - Changes HC4645 Into HC4648 for J/E '77-'89, 65-150 HP

Seastar Ha4641 Baystar Adapter Plate - Converts Hc4645H To Hc4647H - Ha4641 - 1-Ha4641F1

Kit - Converts HC4645 To HC4647 for Honda '98 & later

Seastar Ha1205 Spa Retrofit Kit For Autopilot Pump - Required To Mount To Pa1200-2 Power Assist Pump - Ha1205 - 1-Ha1205F1

Seastar Epsk1207 Est Display Set Up Tool - Epsk1207 - 1-Epsk1207F1

i6800 set up display tool.

Seastar Dk4600 Adapter Kit For Anchor Systems - Dk4600 - 861-Dk4600F1

Required for installation of Power Pole® or Talon® on JP4060 and JP4060HD. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. Port and Starboard.

Seastar Ch2200 Dual Function Ski Boat Control - Ch2200P - 1-Ch2200Pf1

Single lever, dual action for throttle & shift Superior neutral engine warm-up control (ski version)Flush mount design for quick, tidy installationIncludes hardware for two 33 type cablesCrisp shifting ball grip for a solid, sure feel Ski version: All inboard ski boats and other single station craft requiring super-smooth, precise throttle control.

Seastar Capilano Helm W/ 3/4" Taper Shaft - Hh5275 - 1-Hh5275F1

For extra heavy duty/commercial vessels, the Capilano steering system offers extremely rugged and reliable 'variable flow'. Rear-mount helms and heavy duty brass cylinders with stainless steel and bronze mounting hardware.

Seastar Capilano Helm W/ 3/4" Taper Shaft - Hh5250 - 1-Hh5250F1

For extra heavy duty/commercial vessels, the Capilano steering system offers extremely rugged and reliable 'variable flow'. Rear-mount helms and heavy duty brass cylinders with stainless steel and bronze mounting hardware.

Seastar Ap1233 12V Type 2 100 Cubic Inch Autopilot Pump - Compatible W/ Standard Seastar Hoses - Ap1233 - 1-Ap1233F1

Fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. Long life 12 VDC motor (i.e. long life brushes)Compact designSimplified installationLow power consumptionABYC, CE and J1171 compliantSuperior corrosion resistanceQuiet operationMounting bracket includedStand alone or mounts to SeaStar Power Assist unit

Seastar 212151003 Sl-3 Cable Adapter Kit - 212151-003 - 1-212151003F1

For use with 3300 and 3300HP cable. Quick installation and maximum adjustment at engine. Includes throttle and shift adapters.

Seachoice Off/On Push-Pull Switch, 2 Position - 11841 - 50-11841F1

Seachoice Push-Pull Switches are made with marine-grade materials that resist corrosion. This 2-position Off/On push-pull switch is a single pole, single throw, 1-circuit device that turns one circuit on and off. It is normally in the Off position. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Single pole, single throw 1-circuit switch turns one circuit on and off2-position Off/On switch; normally OffHeavy-duty marine-grade construction; chrome-plated brass knob and face nut resist corrosionPlasticized body sealed against moisture and dirtRated 6 to 36V DC; 10 amps @ 12V DCMounting stem measures 1-1/4 inches long x 3/8 inch diameter; 2 (two) 18-gauge insulated copper wire leads are 12 inches longFits panels up to 5/8 inch thickManufacturer part number 50-11841

Seachoice Heavy Duty Rubber Boot Steering Cable Protector - 50-28301 - 50-28301F1

Heavy-duty rubber boot to fit over output end of steering cable at engine for complete protection from elements and preventing lubrication from being washed away. Fits all standard steering cables including Morse, Teleflex, Detmar, etc. Dimensions: 1" ID steering cable end, 3/8" ID output end, 1-1/2" overall diameter, 10" extended length, 3-1/2" minimum length.

Seachoice Heavy Duty 3-Position Push-Pull Switch - 11911 - 50-11911F1

Max Panel Thickness: 1 inch Three-position, multipurpose push-pull switch operates two separate circuitsChrome plated plastic knobFeatures stainless steel springs for added durabilityPositions: Off © On #1 © On #1 and #2.Max Panel Thickness: 1 inchRating: 25A@6VDC, 15A@12VDCManufacturer part number 50-11911