Select Category
Steering & Controls
Raymarine E70139 Acu Actuator Control Unit For Ev300 Autopilots - E70139 - 152-E70139F1
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus.
Raymarine E70328 Autopilot Control Heads, Resolution, 320(H) X 240(V) Pixels, Size: 3.45" Tft Lcd Display, Brightness:1,200 Cd/M2, Power Consumption: 1.57 W, Current: 131 Ma, Voltage: 12 V Dc - E70328 - 152-E70328F1
3.5" super bright, oversized LCDOptical bonding for brighter colors, sharper contrast, and fog-free operationDedicated one and ten-degree course change keysWind vane steering mode with AutoTack control when combined with Raymarine wind instrumentGlass bridge design compliments Axiom-series chartplottersSeaTalkng networking for seamless connection to Raymarine and NMEA2000 networksSupplied with both black (Axiom style) & gunmetal (eSeries style) bezels and protective suncover
Raymarine E70329 Autopilot Control Hea, Resolution: 320(H) X 240(V) Pixels, Size: 3.45" Tft Lcd Display, Brightness:1,200 Cd/M2, Power Consumption: 1.57 W, Current: 131 Ma, Voltage: 12 V Dc - E70329 - 152-E70329F1
3.5" super bright, oversized LCDOptical bonding for brighter colors, sharper contrast, and fog-free operationRotary controller for course changes and power steer modeGlass bridge design compliments Axiom-series chartplottersSeaTalkng networking for seamless connection to Raymarine and NMEA2000 networksSupplied with both black (Axiom style) & gunmetal (Series style) bezels and protective suncover
Raymarine Ev-100 Cockpit Autopilot - Sail - T70152 - 152-T70152F1
Pack Contains: EV1 Sensor Core Designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.Actuator Control Unit-100 Specifically designed to complement Raymarine's unique wheel-drive and tiller-drive applications, the ACU-100 provides a powerful and secure interface between steering systems and the revolutionary EV-1 course computer and 9-axis sensor. Fully sealed so may be mounted above decks on boats where space is limited.p70 / p70s Autopilot Control Head (Sail) The p70 / p70s autopilot control head is a push-button operation controller designed primarily for sailboats. Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions. The p70 / p70s control head features the LightHouse user interface and a start up wizard to help you configure the pilot quickly and easily.Wheel Drive The EV-100 wheel pilot comprises a fully enclosed wheel-drive for simple installation and superb autopilot performance. Quick and easy installation, Fits most types of wheel, Simple robust clutch engagement mechanism. Specifications: Maximum recommended laden boat displacement: 7,500kg (16,500lbs), Revs per minute (rpm): 9, Thrust: 30Nm, Connections: STng (x1), NMEA 2000 with adapter cableEvolution Cabling Kit - Contains: ng Power Cable (0.4m) 1 x SeaTalkng Backbone Cable (5m) 1 x SeaTalkng Spur Cable (0.4m) 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connector 2 x SeaTalkng Terminator
Raymarine Ev-100 Power Autopilot System - T70154 - 152-T70154F1
The EV-100 Power autopilot system consists of the revolutionary EV-sensor core, the fully-sealed and compact ACU-100, a P70R control interface, and Raymarine's new highly efficient 0.5 litre hydraulic pump. Perfect for vessels with single outboard engines and hydraulic steering, install the entire system above or below decks as required, and benefit from world-leading autopilot performance at a truly head-turning price.
Raymarine Ev-200 Evolution Hydraulic Autopilot Pack - T70157 - 152-T70157F1
The EV-200 Power autopilot system consists of the revolutionary EV-sensor core, the fully-sealed and compact ACU-100, a P70R control interface, and Type 1 hydraulic pump. A complete autopilot-in-a-boxEvolution AI for superior performanceNo calibration requiredIncludes Type 1 Hydraulic Drive UnitSeaTalkng Network CompatibleACU-200 auxiliary power to SeaTalkng networkIncludes P70R Autopilot Controller
Raymarine Ev-200 Inboard Autopilot - Power_No Drive - T70156 - 152-T70156F1
The EV-200 Power autopilot system consists of the revolutionary EV-sensor core, the fully-sealed ACU-200, a P70Rs control interface. Type 1 hydraulic drive sold separately. Evolution AI for superior performanceNo calibration requiredFor use with Type 1 hydraulic drives (sold separately)SeaTalkng Network CompatibleACU-200 auxiliary power to SeaTalkng networkIncludes P70Rs Autopilot Controller
Raymarine St1000 Removable Cockpit Autopilot - A12004 - 152-A12004F1
Whether used as a stand-alone pilot or with SeaTalk/NMEA GPS, the clear backlit LCD and 6 button keypad make these pilots safe and easy to use. For Tiller Steered YachtsAutoTack lets you handle the sheets while the pilot tacks the boatAutoSeastate intelligently keeps the boat on course while conserving power
Raymarine St2000 Removable Cockpit Autopilot - A12005 - 152-A12005F1
Whether used as a stand-alone pilot or with SeaTalk/NMEA GPS, the clear backlit LCD and 6 button keypad make these pilots safe and easy to use. For Tiller Steered YachtsAutoTack lets you handle the sheets while the pilot tacks the boatAutoSeastate intelligently keeps the boat on course while conserving power
Raymarine T70330 Evolution Ev-150 Hydraulic Autopilot System Pack - T70330 - 152-T70330F1
The Evolution EV-150 Hydraulic Autopilot System Pack is a complete autopilot-in-a-box kit that is ready to install on many popular fishing and cruising powerboats with hydraulic steering. The system comes complete with our p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, Type 1 Hydraulic Pump, and an Evolution autopilot cabling kit. Engineered for simplicity, Raymarine's award-winning Evolution autopilots eliminate the need for complicated set up and calibration. Thanks to the intelligent 9-axis EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments. The result is precise and confident course keeping, regardless of vessel speed or sea conditions. The Evolution EV-150 system also employs Raymarine's patented Hydro-Balance™ technology which delivers superior autopilot performance for hydraulically steered boats, particularly those with outboard motors and rudder-reference less systems. Hydro-Balance automatically compensates for hydraulic system elasticity, steering system asymmetry, and torque steer to keep your boat on-course at trolling speed, cruising speed, and all-out running. Anglers will also love the Evolution Autopilot's built-in trolling patterns. Let the autopilot work the boat while you prep bait, set your lines and adjust your spread. The system is also equipped with Raymarine latest Evolution TrackIQ™ algorithms which deliver tighter track-keeping and faster track acquisition. It also uses information on vessel pitch, roll, yaw and heave to stabilize GPS navigation data like course over ground, speed over ground and cross track error for the best possible tracking to waypoints and routes. Includes E70329 p70Rs Control HeadE70096 EV-1 Sensor CoreR70160 Evolution Cable KitE70430 ACU-150 Actuator Control UnitM81120 Type 1 12v Hydraulic PumpM81120 Type 1 12v Hydraulic Pump
Reactor40 Hydraulic Corepack W Smartpump V2, Without Ghca - 010-00705-78 - 322-0100070578F1
Red Knob - 4009912 - 1-4009912F1
Replacement control knobs fit most controls with 3/8-24 threaded handles.
Rotary Tilt Steering Helm - T81Fc - 216-T81Fcf1
For the ultimate in driving comfort these tilt steering helms feature a 5 position tilt range, and the Planetary Gear design which delivers responsive steering with reduced rudder torque. These helms are intended for use with the Uflex M66 steering cable and X52 tilt assembly. Not intended for use on applications where the horsepower exceeds the rating of the boat. X52 Tilt mechanism must be ordered separately. Features: Tilt range of 48° and five locking positionsTilt device eliminates underdash movementStandard 3/4" tapered shaft - stainless steelCorrosion resistant materialsLock-to-lock steering wheel turns: approx. 3.8Stroke: 9"Maximum allowable steering wheel diameter: 16"Minimum steering cable bend radius: 7.9"
Rotech Dual Cable Rotary Steering Helm - T72Fc - 216-T72Fcf1
Featuring the Planetary Gear design, the T71FC single cable helm and T72FC dual cable helm will deliver responsive steering with reduced rudder torque. Ideal for boats with power assisted steering or minimal rudder torque, these helms are intended for use with the Uflex M66 steering cable and X34/X35 mounting bezel. Not intended for use on applications where the horsepower exceeds the rating of the boat.Features:Corrosion resistant materialsStandard 3/4" tapered shaftLock-to-lock steering wheel turns: approx. 3.8Stroke: 9"Maximum allowable steering wheel diameter: 16"Minimum steering cable bend radius: 7.9"Minimal feedback
Rotech Rotary Steering Helm - T71Fc - 216-T71Fcf1
Featuring the Planetary Gear design, the T71FC single cable helm and T72FC dual cable helm will deliver responsive steering with reduced rudder torque. Ideal for boats with power assisted steering or minimal rudder torque, these helms are intended for use with the Uflex M66 steering cable and X34/X35 mounting bezel. Not intended for use on applications where the horsepower exceeds the rating of the boat.Features:Corrosion resistant materialsStandard 3/4" tapered shaftLock-to-lock steering wheel turns: approx. 3.8Stroke: 9"Maximum allowable steering wheel diameter: 16"Minimum steering cable bend radius: 7.9"Minimal feedback
Safe-T Quick Connect Helm Only, Single - Sh5094-1P - 1-Sh50941Pf1
SH50941P: Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end for a port run cable. The widely accepted QC spring & hitch pin feature available on both sides of the helm.
Safe-T/Qc Tilt Helm, Single Engine - Sh91523-1P - 1-Sh915231Pf1
Single cable tilt helm for inboards and power-assisted stern drives.Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end for a port run cable. Same widely accepted QC spring & Hitch Pin feature available on both sides of the helm.Requires SH91800P tilt mechanism to complete Tilt Steering system installation.
Scanstrut Scanpod Helmpod For 9" Display, White - Sph-8-W - 922-Sph8Wf1
With great design features, the Scanstrut Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the choice is yours! Universal Helm Fixing - Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") diameter. Using a unique clamping system, the Deep Pods can fit rail widths from 178mm (7") upwards.* Secure & Watertight Install - Saddle system supports the stainless tubing enabling a secure & rigid fit onto any pedestal and also ensures a watertight seal at cable entry. No Drill Fixing Kit - Customized U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service - Fixings fit from back to front cutting their threads into injection molded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection - Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time.
Scanstrut Scanpod Helmpod, White - Sph-4Xi-W - 922-Sph4Xiwf1
With great design features, the Scanstrut Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the choice is yours! Universal Helm Fixing - Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") diameter. Using a unique clamping system, the Deep Pods can fit rail widths from 178mm (7") upwards.* Secure & Watertight Install - Saddle system supports the stainless tubing enabling a secure & rigid fit onto any pedestal and also ensures a watertight seal at cable entry. No Drill Fixing Kit - Customized U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service - Fixings fit from back to front cutting their threads into injection molded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection - Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time.
Schmitt Cap For Existing Helm Nut, Stainless Steel - Cap0303 - 120-Cap0303F1
Cap for Existing Helm Nut, Chrome/Plastic
Seachoice 2-Position Push-Pull Switch, Off/On - 11931 - 50-11931F1
Max Panel Thickness: 1 inch Two-position, multipurpose off/on switch is suitable for many general applications including the operation of lights, bilge pumps, blowers and baitwell pumpsChrome plated plastic knobChrome plated brass face nut, washer and back-up nut for added durabilityCircuits: 1Max Panel Thickness: 1 inchRating: 25A@6VDC, 15A@12VDCManufacturer part number 50-11931
Seachoice 28011 Outboard Hydraulic Steering Lock - 28011 - 50-28011F1
Attaches to outboard steering cylinders for trailering-reduces pressure on cylinder Attaches to outboard steering cylinders for trailering-reduces pressure on cylinderAttached cord for easy removal and storage of clipsClips are made of thermoplastic rubberHigh visible color acts as a reminder to remove before use
Seachoice 28423 Hydraulic Steering Fluid - Synthetic Blend, Iso 15, 1 Qt. - 28423 - 50-28423F1
Seachoice Hydraulic Steering Fluid is engineered to ensure optimum performance for marine hydraulic steering systems. It provides outstanding antioxidant performance in ASTM D2272 testing, as well as superior anti-wear and anti-corrosion capabilities. It can be safely used in all hydraulic applications recommending an ISO 15 fluid. ISO 15Synthetic blendAnti-corrosion & anti-wearFor all marine hydraulic steering systems, including Evinrude G2Can be used to top off fluids or as a flush and fill
Seachoice 3 Position Push Pull Switch Off/On#1/On#2 - 11921 - 50-11921F1
Heavy Duty. AMounting stem: 1-1/4" L x 3/8" dia. 3 Position: Off - On #1 - On #2. Two separate circuits. Suited for anchor lights and a separate circuit for running lights. Brass hex back-up nut, brass washer. Chrome plated plastic knob.
Seachoice 3-Position Push-Pull Switch - 11941 - 50-11941F1
Seachoice Push-Pull Switches are made with marine-grade materials that resist corrosion. This 3-position switch is normally off. The first "On" energizes the first circuit; the second "On" energizes both circuits. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Normally off, 3-position push-pull switch with a variety of connections when pulledFirst "On" energizes 1 circuit; second "On" energizes both circuitsCorrosion resistant construction excellent for marine applications; brass hex back-up nut, brass washer, chrome-plated plastic face nut, chrome-plated plastic knobRated 25 amps @ 6V DC; 15 amps @ 12V DCFits panels up to 1 inch thickManufacturer part number 50-11941
Seachoice 95101 Aluminum Anode Kit For 4 Cylinder Mercury Verado - 50-95101 - 50-95101F1
Includes: Block anode for gimbal housing (1)Plates for side of lower unit (2)Skeg for ventilation plate (1)316 Stainless steel screws18-8 / 304 Stainless steel screws
Seachoice 95111 Magnesium Anode Kit For 4 Cylinder Mercury Verado - 50-95111 - 50-95111F1
Includes: Block anode for gimbal housing (1)Plates for side of lower unit (2)Skeg for ventilation plate (1)316 Stainless steel screws18-8 / 304 Stainless steel screws
Seachoice 95121 Aluminum Anode Kit For 6 Cylinder Mercury Verado - 50-95121 - 50-95121F1
Includes: Block anode for gimbal housing (7, various)Skeg for ventilation plate (1)316 Stainless steel screwsPlates for side of lower unit (2)18-8/304 Stainless steel screws
Seachoice 95131 Magnesium Anode Kit For 6 Cylinder Mercury Verado - 50-95131 - 50-95131F1
Includes: Block anode for gimbal housing (7, various)Skeg for ventilation plate (1)316 Stainless steel screwsPlates for side of lower unit (2)18-8/304 Stainless steel screws
Seachoice Heavy Duty 2-Position Push-Pull Switch, On/Off - 11901 - 50-11901F1
Max Panel Thickness: 1 inch Two-position, multipurpose on/off switch is suitable for many general applications including the operation of lights, bilge pumps, blowers and baitwell pumpsChrome plated plastic knobFeatures stainless steel springs for added durabilityCircuits: 1Max Panel Thickness: 1 inchRating: 25A@6VDC, 15A@12VDCManufacturer part number 50-11901
Seachoice Heavy Duty 3-Position Push-Pull Switch - 11911 - 50-11911F1
Max Panel Thickness: 1 inch Three-position, multipurpose push-pull switch operates two separate circuitsChrome plated plastic knobFeatures stainless steel springs for added durabilityPositions: Off © On #1 © On #1 and #2.Max Panel Thickness: 1 inchRating: 25A@6VDC, 15A@12VDCManufacturer part number 50-11911
Seachoice Heavy Duty Rubber Boot Steering Cable Protector - 50-28301 - 50-28301F1
Heavy-duty rubber boot to fit over output end of steering cable at engine for complete protection from elements and preventing lubrication from being washed away. Fits all standard steering cables including Morse, Teleflex, Detmar, etc. Dimensions: 1" ID steering cable end, 3/8" ID output end, 1-1/2" overall diameter, 10" extended length, 3-1/2" minimum length.
Seachoice Off/On Push-Pull Switch, 2 Position - 11841 - 50-11841F1
Seachoice Push-Pull Switches are made with marine-grade materials that resist corrosion. This 2-position Off/On push-pull switch is a single pole, single throw, 1-circuit device that turns one circuit on and off. It is normally in the Off position. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Single pole, single throw 1-circuit switch turns one circuit on and off2-position Off/On switch; normally OffHeavy-duty marine-grade construction; chrome-plated brass knob and face nut resist corrosionPlasticized body sealed against moisture and dirtRated 6 to 36V DC; 10 amps @ 12V DCMounting stem measures 1-1/4 inches long x 3/8 inch diameter; 2 (two) 18-gauge insulated copper wire leads are 12 inches longFits panels up to 5/8 inch thickManufacturer part number 50-11841
Seastar 212151003 Sl-3 Cable Adapter Kit - 212151-003 - 1-212151003F1
For use with 3300 and 3300HP cable. Quick installation and maximum adjustment at engine. Includes throttle and shift adapters.
Seastar Ap1233 12V Type 2 100 Cubic Inch Autopilot Pump - Compatible W/ Standard Seastar Hoses - Ap1233 - 1-Ap1233F1
Fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. Long life 12 VDC motor (i.e. long life brushes)Compact designSimplified installationLow power consumptionABYC, CE and J1171 compliantSuperior corrosion resistanceQuiet operationMounting bracket includedStand alone or mounts to SeaStar Power Assist unit
Seastar Capilano Helm W/ 3/4" Taper Shaft - Hh5250 - 1-Hh5250F1
For extra heavy duty/commercial vessels, the Capilano steering system offers extremely rugged and reliable 'variable flow'. Rear-mount helms and heavy duty brass cylinders with stainless steel and bronze mounting hardware.
Seastar Capilano Helm W/ 3/4" Taper Shaft - Hh5275 - 1-Hh5275F1
For extra heavy duty/commercial vessels, the Capilano steering system offers extremely rugged and reliable 'variable flow'. Rear-mount helms and heavy duty brass cylinders with stainless steel and bronze mounting hardware.
Seastar Ch2200 Dual Function Ski Boat Control - Ch2200P - 1-Ch2200Pf1
Single lever, dual action for throttle & shift Superior neutral engine warm-up control (ski version)Flush mount design for quick, tidy installationIncludes hardware for two 33 type cablesCrisp shifting ball grip for a solid, sure feel Ski version: All inboard ski boats and other single station craft requiring super-smooth, precise throttle control.
Seastar Dk4600 Adapter Kit For Anchor Systems - Dk4600 - 861-Dk4600F1
Required for installation of Power Pole® or Talon® on JP4060 and JP4060HD. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. Port and Starboard.
Seastar Epsk1207 Est Display Set Up Tool - Epsk1207 - 1-Epsk1207F1
i6800 set up display tool.
Seastar Ha1205 Spa Retrofit Kit For Autopilot Pump - Required To Mount To Pa1200-2 Power Assist Pump - Ha1205 - 1-Ha1205F1
Seastar Ha4641 Baystar Adapter Plate - Converts Hc4645H To Hc4647H - Ha4641 - 1-Ha4641F1
Kit - Converts HC4645 To HC4647 for Honda '98 & later
Seastar Ha4642 Baystar Adapter Plate - Converts Hc4645H To Hc4648H - Ha4642 - 1-Ha4642F1
Kit - Changes HC4645 Into HC4648 for J/E '77-'89, 65-150 HP
Seastar Ha4643 Baystar Adapter Plate - Converts Hc4645H To Hc4658H - Ha4643 - 1-Ha4643F1
Kit - Changes HC4645 Into HC4658 for J/E 40-140 HP 4-Stroke
Seastar Ha5438 Bleed Hose - Use For Seastar Outboard Steering Kit - Ha5438 - 1-Ha5438F1
Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes: hose with screw cap which fits SeaStar or equivalent oil bottles and push pin for venting/resealing bottle. Allows for clean bleed when used properly.
Seastar Ha5450 Helm Remote Fill Kit For Capilano Systems - Ha5450 - 1-Ha5450F1
Will facilitate filling and purging of steering system at a more convenient and accessible area than at a helm pump. Contains thru-dash fitting, waterproof vent plug, elbow fittings and 18" of vinyl tube.
Seastar Ha5458H Hydraulic Fluid, 5-Gallon Pail - Ha5458H - 1-Ha5458Hf1
SeaStar Hydraulic Steering Fluid is engineered with a proprietary additive package which contains anti-foaming and anti-rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and a water emulsification additive SeaStar Hydraulic Steering Fluid is the ONLY steering fluid which is Validated and Performance Matched to ensure the optimum performance and safety of SeaStar Solutions Hydraulic Steering Systems
Seastar Ha5461 Dual Cylinder Adapter For Power Purge Jr. - Ha5461 - 1-Ha5461F1
The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat - by using Power Purge this can be reduced to 10 minutes or less.Features:Speed, quality, and ease-of-operationExtended portablility for use in the field - weighs only 12 poundsConvenient electrical hook-up utilizing an avail able12-volt boat battery
Seastar Ha5477 Grounding Strap For O/B Cylinder - Ha5477 - 1-Ha5477F1
The grounding strap kit is designed to provide added protection against corrosion caused by stray current. This is designed for use on the SeaStar and BayStar front mount outboard cylinders. Included with all new SeaStar front mount cylinders.
Seastar Ha5731 Capilano 18" Hose Kit For Copper Tubing (2 Hoses) - Ha5731 - 1-Ha5731F1
Contains two hoses 18" long. For single cylinder applications. Supplied with 1/2" swivel flare nuts on each end. Required of steering systems installed with copper tubing to accommodate slight cylinder movement.
Seastar Ha5822 High Strength Tiller Bolt W/ Nylock Nut 3/8" - Ha5822 - 1-Ha5822F1
SeaStar outboard steering offers three models of steering cylinders to suit most applications: Front Mount, Side Mount, and Splashwell Mount.Front Mount cylinders are balanced and the most commonly used. They are designed for single engines to 350 hp and multiple outboard engine installations with total power to 700 hp in counter rotating applications. Before ordering, determine the best application for the boat based on hull design, speed, and usage.Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.
Seastar Ha6801 Hardware Kit Only | Use For Hc6845 Tournament Series Single Engine Single Cylinder - Ha6801 - 1-Ha6801F1
Hardware Kit
Seastar Ha6802 Hardware Kit Only | Use For Hc6845 Tournament Series Twin Engine Single Cylinder - Ha6802 - 1-Ha6802F1
Hardware Kit
Seastar Ha6804 Hardware Kit Only | Use For Hc6845 Tournament Series Twin Engine Dual Cylinder - Ha6804 - 1-Ha6804F1
Hardware Kit
Seastar Ha6806 Hardware Kit Only | Use For Hc6845 Tournament Series Triple Engine Dual Cylinder - Ha6806 - 1-Ha6806F1
Hardware Kit
Seastar Hc46453 Basic Baystar Compact Cylinder - Hc4645-3 - 1-Hc46453F1
This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.
Seastar Hc46473 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4647-3 - 1-Hc46473F1
This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.
Seastar Hc46483 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4648-3 - 1-Hc46483F1
This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.
Seastar Hc46583 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4658-3 - 1-Hc46583F1
This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.
Seastar Hc5313-3 Inboard 7" Stroke 8.3 Cubic Inch Atm Aluminum Cylinder - Model Ba135-7Atm - Hc5313-3 - 1-Hc53133F1
These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.
Seastar Hc5351 Capilano Inboard 7" Stroke Ball Joint Cylinder - Hc5351 - 1-Hc5351F1
A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.
Seastar Hc53733 Capilano Inboard 9" Stroke Ball Joint Cylinder - Hc5373-3 - 1-Hc53733F1
A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.
Seastar Hf6005 Orb Tee Fitting Kit - 3/8" Tube - 2 Per Kit - Hf6005 - 1-Hf6005F1
Tournament series ORB tee fitting kit.
Seastar Hf6006 Stainless Steel Vertical Tee Fitting For Seastar Steering Cylinders & Helm Pumps - 2 Per Kit - Hf6006 - 1-Hf6006F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6007 Fitting Kit With 25' Tubing (Ht5092) For Seastar Helms - Use For -3 Models Only - Hf6007 - 1-Hf6007F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6008 1/2" Nf Nylon Brass Nuts, 6/Sets - Hf6008 - 1-Hf6008F1
SeaStar HF6008 1/2" NF Nylon Brass Nuts, 6/pk
Seastar Hf6009 Straight 3/8" Fitting Kit For Seastar & Baystar Helm Pumps - 2 Per Kit - Hf6009 - 1-Hf6009F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6010 3/8" Fitting Kit For Seastar Helms - Hf6010 - 1-Hf6010F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6011 45 Degree Elbow 3/8" Fitting For Seastar & Baystar Helm Pumps - 2 Per Kit - Hf6011 - 1-Hf6011F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6012 5 Orb (M) 1/4" Npt (F) Fitting Kit For Seastar Helms - 3 Per Kit - Hf6012 - 1-Hf6012F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Ho5009 Tie Bar Kit For Side Mount Cylinder - Ho5009 - 1-Ho5009F1
SeaStar HO5009 Tie Bar Kit for Side Mount Cylinder. Includes bar and extension plate for twin engines.
Seastar Ho5035 Engine Adapter Plate For Single Mercury (1989 To Date) - Ho5035 - 1-Ho5035F1
SeaStar HO5035 Engine Adapter Plate for Single Mercury (1989 to Date). Includes bar and extension plate for twin engines.
Seastar Ho6003 Universal Tie Bar Kit For Port Engine To Drive Cylinder - Ho6003 - 1-Ho6003F1
SeaStar HO6003 Universal Tie Bar Kit for Port Engine to Drive Cylinder.
Seastar Ho6010 36" Mechanical Tie Bar Kit For Small Kicker Trolling Motor - Ho6010 - 1-Ho6010F1
For hooking up a small kicker motor for trolling. Compatible with HC5345 or HC5358 steering cylinders.
Seastar Ho6819 Tournament Series Adjustable Tie Bar - Ho6819 - 1-Ho6819F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Ho6820 Tournament Series Adjustable Tie Bar - Ho6820 - 1-Ho6820F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Ho6821 Tournament Series Adjustable Tie Bar - Ho6821 - 1-Ho6821F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s). These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Ho6822 Tournament Series Adjustable Tie Bar - Ho6822 - 1-Ho6822F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Ho6823 Tournament Series Adjustable Tie Bar - Ho6823 - 1-Ho6823F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Hp6001 Hydraulic Hardware Kit | Includes Cap Screw, Hex Head, 3/8" Nf X 1 1/4" Sst, 3/Sets - Hp6001 - 1-Hp6001F1
Seastar Hp6003 Ball Joint For Tie Bar | 1/2" Sst - Hp6003 - 1-Hp6003F1
SeaStar HP6003 Ball Joint for Tie Bar | 1/2" SST.
Seastar Hp6007 Hydraulic Hardware Kit | Includes Bolt, Hex Head & Nut 3/8" X 1 5/8", 3/Sets - Hp6007 - 1-Hp6007F1
Seastar Hp6016 Support Rod For Front Mount & Outboard Cylinders - Hp6016 - 1-Hp6016F1
SeaStar HP6016 Support Rod for Front Mount & Outboard Cylinders.
Seastar Hp6031 Mounting Hardware & Slide Plate For Outboard Cylinder - Hp6031 - 1-Hp6031F1
SeaStar HP6031 Mounting Hardware & Slide Plate for Outboard Cylinder.
Seastar Hp6033 Mounting Hardware For Outboard Pivot Plate Cylinder - Hp6033 - 1-Hp6033F1
SeaStar HP6033 Mounting Hardware for Outboard Pivot Plate Cylinder.
Seastar Hp6033 Pivot Cylinder Mounting Hardware Kit - Hp6036 - 1-Hp6036F1
Pivot cylinder mounting hardware kit for outboard front mount cylinder
Seastar Hp6044 Bleed Nipple Caps For All Seastar Cylinders, 12/Bag - Hp6044 - 1-Hp6044F1
Bleed nipple caps for all Seastar Cylinders
Seastar Hp6050 Support Rod For Baystar Cylinder, 2/Bag - Hp6050 - 1-Hp6050F1
Support rod for Baystar Cyliner only
Seastar Hp6148 Helm Adapter Kit For Power Purge Jr. - Hp6148 - 1-Hp6148F1
Helm Adapter Kit for Power Purge Jr.
Seastar Ht4420H Baystar 20' Tubing Kit | Includes 2 Pieces Per Kit - Ht4420H - 1-Ht4420Hf1
Can be used with all BayStar helms with appropriate fittings. Kit contains two cut lengths of tubing.(NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.)
Seastar Ht4430H Baystar 30' Tubing Kit - Includes 2 Pieces Per Kit - Ht4430H - 1-Ht4430Hf1
Can be used with all BayStar helms with appropriate fittings. Kit contains two cut lengths of tubing.(NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.)
Seastar Jack Plate Mounting Bolt Kit (Includes 4 Each Stainless Steel Bolts, Brass Nylock Nuts And Washers) - Dk6125 - 861-Dk6125F1
Package includes 4 each: Stainless steel bolts, brass nylock nuts and stainless steel washers.
Seastar Jack Plate Mounting Bolt Kit (Includes 4 Each Stainless Steel Bolts, Brass Nylock Nuts And Washers) - Dk6135 - 861-Dk6135F1
Package includes 4 each: Stainless steel bolts, brass nylock nuts and stainless steel washers.
