Select Category
Trailer & Towing
1-3/8 Bearings Bulk Pk/10 - 81160 - 641-81160F1
Sized to fit all popular trailers.
1-3/8 X 1-7/8 X 5-1/2 Brass Cutless Bearing - Devilfish - 87-Devilfishf1
Pollution-Free Naval Brass Marine BearingsBrass sleeve with rubber oil resistant shaft. The clean bearing that cushions the shaft, installs in minutes and lasts for yearsMorse Bearings are engineered to meet the toughest service requirements in corrosive and abrasive marine or industrial applications. The fluted rubber bearings surface will outlast hard surface bearings by more than 10 times. All materials meet U.S. Navy specs MIL-B-17901A CLII. Bearing Selection: Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter.It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths. * Slimline Bearing. Bearing area is: Bearing I.D. (shaft diameter) multiply x bearing length. Loading capability is determined by: Multiplying that bearing area x 35 psi. Example: (RAY)- 3" shaft dia. x 12" length 36 sq." bearing area x 35 psi 1,260 lbs. Is bearing load capacity
1" Bearings, Pair - 81302 - 641-81302 Superseded By: 641-K71G0008F1
10 Keel Roller - Rp-10 - 122-Rp10F1
Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation.
10 Vented Rotr Hubdisc Brk Kit 641-82113 - K71-G00-98 - 641-K71G0098F1
12 Keel Roller - Rp-12 - 122-Rp12F1
Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation.
18 Keel Roller - Rp-18 - 122-Rp18F1
Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation.
2.047 Bearing Buddy W/Bra Model 2047-A Chrome With Gli - 42411 - 176-42411F1
2.328 Bearing Buddy W/Bra Model 2328-A Chrome With Gli - 43105 - 176-43105F1
2.441 Bearing Buddy W/Bra Model 2441-A Chrome With Gli - 42445 - 176-42445F1
2.441 Dia.Bearing Buddy 2/Cd - 42440 - 176-42440F1
The Bearing Buddy prevents wheel bearing failure on boat, snowmobile, ATV, RV and utility trailers. It eliminates bearing repacking and keeps water and dirt out of hubs and bearings. Features stainless steel components, chrome plated steel barrel and is easy to install.You can choose to purchase your set with the Bearing Buddy bra which is a vinyl cover that fits over the Bearing Buddy to contain excess grease and keep it off tires and wheels.
2.717 Bearing Buddy W/Bra Model 2717-A Chrome With Gli - 43712 - 176-43712F1
2' Bunk Board Guide Kit - 86123 - 241-86123F1
Marine grade carpet cradles your boat, protecting it from scratches and dings. All hardware is galvanized for corrosion protection, and fits frames up to 4-1/4" in size. Mounts 19" above trailer frame and have 13" of side movement on each side. All hardware included.
3" Heavy Duty Roller Frame - 801-Hd - 655-801Hdf1
Caged roller frame holds 7" full-width covers and covers cut to narrower widths.
3" Roller 3/8" Nap - 23123 - 321-23123F1
For smooth and semi-smooth surfaces. Baked phenolic core. For fiberglass and bottom paint. 1-1/2" Diameter
3" Trim Roller 1/8 Nap - R106H3 - 130-R106H3F1
3" Mohair cover. 1/8" galvanized midget slim wire handle.
4 Keel Roller - Rp-4 - 122-Rp4F1
Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation.
4 Wave Roller 1/4 Phenolic - R125F4 - 130-R125F4F1
Unique, blue and white stripe, super soft, 1/4" nap mohair blend. Super premium application of urethanes, enamels, varnishes, and other marine coatings on smooth surfaces. Extra strong solvent-resistant 1 1/2" I.D. phenolic core.
4" Acryl Roller W/Stripe - 92901 - 50-92901F1
Ideal for tight spaces.1/2" Solvent resistant. nap can be used with all paints includingbottom paints
4" Foam Roller-2/Pk - 92911 - 50-92911F1
Ideal for tight spaces.Foam is used for all smooth surfaces. Ideal for the application of enamel, latex, stain, oil paints and varnish. Not for shellac or lacquer.Domed on two sides
5 Keel Roller - Rp-5 - 122-Rp5F1
Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation.
