5' Bunk Board Guide Kit - 86124 - 241-86124F1

Marine grade carpet cradles your boat, protecting it from scratches and dings. All hardware is galvanized for corrosion protection, and fits frames up to 4-1/4" in size. Mounts 19" above trailer frame and have 13" of side movement on each side. All hardware included.

5" Aluminum Resin Roller - 25101 - 321-25101F1

Good for multiple layer laminating jobs, Made with durable aluminum alloy rollers. Ergonomic handle includes acme thread for pole attachment.

6" Foam Roller 2/Pk - 92924 - 50-92924F1

6" Mini Roller Frame - 92923 - 50-92923F1

7 Keel Roller - Rp-7 - 122-Rp7F1

Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation.

7 Slicker 1/8 Roller W/ - R780012F7 - 130-R780012F7F1

Fine celled foam. For enamels, varnish, urethanes, on smooth surfaces. Solvent resistant phenolic core.

7 Wave Roller 1/4 Phenolic - R125F7 - 130-R125F7F1

Unique, blue and white stripe, super soft, 1/4" nap mohair blend. Super premium application of urethanes, enamels, varnishes, and other marine coatings on smooth surfaces. Extra strong solvent-resistant 1 1/2" I.D. phenolic core.

7" Roller 1/4" Nap - 27114 - 321-27114F1

Has a baked phenolic core. For smooth surfaces and enamel paint. 1-1/2" Diameter.

7" Roller 3/8" Nap - 27123 - 321-27123F1

For smooth and semi-smooth surfaces. Baked phenolic core. For fiberglass and bottom paint. 1-1/2" Diameter

73020A14 Merc Bearing Carrier - 18-2191 - 47-2191F1

8 H.D. Keel Roller-5/8 - 11215-1 - 23-112151F1

8 Keel Roller - Rp-8 - 122-Rp8F1

Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation.

9 Heavy Duty 5Mm Thick Foam Roller - 92521 - 50-92521F1

Rollers are extra thick for longer painting actionGreat for tight spotsCan be used with bottom paintsPolypropylene core

9 Professional Roller Frame - Rf2099 - 346-Rf2099F1

5-Wire cage model. Threaded grips with metal ferrules

9 Roller 3/8 Nap Poly Core - Rr 938-Cp 9" - 346-Rr938Cp9F1

Knit fabric covers. 2-ply polypropylene core. Utility quality for general maintenance.

9 Wave Roller 1/4 Phenolic - R125F9 - 130-R125F9F1

Unique, blue and white stripe, super soft, 1/4" nap mohair blend. Super premium application of urethanes, enamels, varnishes, and other marine coatings on smooth surfaces. Extra strong solvent-resistant 1 1/2" I.D. phenolic core.

9" Fiberglass Resin Roller - 29900 - 321-29900F1

Spreads resin without leaving air pockets or bubbles. Reduces, or in some cases eliminates, the need for a second step with metal roller. Solvent resistant polypropylene core.

9" Foam Roller - 29311 - 321-29311F1

Smooth. For 2-part urethane systems and topside enamels. Has a baked phenolic core. 1-1/2" diameter.

9" Industrial Roller Frame - 39011 - 321-39011F1

5 Wire design. 5/16" shank. Heavy duty threaded plastic handle.

9" Roller 1/4" Nap - 29114 - 321-29114F1

Has a baked phenolic core. For smooth surfaces and enamel paint. 1-1/2" Diameter.

9" Roller 3/16" Mohair Red - 29113 - 321-29113F1

Has a solvent resistant core. For smooth surfaces and enamel paint. 1-1/2" diameter.

9" Roller 3/8" Nap - 29123 - 321-29123F1

For smooth and semi-smooth surfaces. Baked phenolic core. For fiberglass and bottom paint. 1-1/2" Diameter

9" Slicker Roller - R-780-012F-9 - 130-R780012F9F1

Fine celled foam. For enamels, varnish, urethanes, on smooth surfaces. Solvent resistant phenolic core.

A Frame Jack 2000# Topwind - 155022 - 220-155022F1

15" of Travel. Finish: primed outer, zinc inner tube. Corrosion proof cap is removable for gear lubrication. 1/4" thick A-frame plate. Weld-on/bolt-on bracket. Less wheel or base. Measurements: retracted-8.2", extended-23.2", clearance-12.2".

A-Frame Top Wind Economy Utility Jack - Ea20000103 - 220-Ea2000F1

14" of travelRetracted 8", extended 22.25"Black painted outer and inner tubeWeight: 12 lbs.