Strainer for Type FTR140 This strainer is for the FTR140 waterstrainers. Product Specifications Dimensions3" L × 3" W × 3" HShipping Weight0.09 lb More Details

Thruster Panel Joystick Thanks to the deluxe design and the high-quality coated aluminum front, this new bow or stern thruster panel will be an asset to your dashboard! The panel can be fitted into a ... More Details

V-CAN 3-Point Y-Hub The CANVHUB is a groundbreaking advancement for V-CAN installations, designed to elevate your hardware mounting and cable management experience, specifically tailored for boat buil... More Details

V-CAN Power Supply  - 12V Input Output Max 5A The CANVPS is set to replace the BPCABCPC, bringing a new level of reliability and protection to your V-CAN installations. This advanced power supply is d... More Details

V-Ring V-Ring for BOW125D Product Specifications Dimensions1" L × 1" W × 1" HShipping Weight0.1 lb More Details

V-Ring V30-A Rubber Features: V30-A Rubber V-Ring Product Specifications Dimensions1" L × 1" W × 1" HShipping Weight0.1 lb More Details

Zinc Anode Set f/Bow Thruster - 25 kgf Bow Thrusters Spare set zinc anode for 25 kgf bow thrusters. Supplied with two stainless steel allen head countersunk set screws. Product Specifications Dimensio... More Details

Zinc Anode Set f/Bow Thruster - 35/55 kgf Bow Thrusters Spare set zinc anode for 35/55 kgf bow thrusters. Supplied with two stainless steel allen head countersunk set screws. Product Specifications Di... More Details

Zinc Anode Set f/Bow Thrusters - 75/80/95 kgf Bow Thrusters Spare set zinc anode for 60/75/80/95 kgf bow thrusters. Supplied with two stainless steel Allen head countersunk set screws. Product Specifi... More Details

A.C.E. Transducer Epoxy The perfect material for any in-hull transducer installation. A.C.E stands for Acoustically Conductive Epoxy. This will ensure the bond between the transducer and the boat hull... More Details

11lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas l... More Details

17lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas l... More Details

22lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas l... More Details

.75" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the con... More Details

.75" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and secu... More Details

1.25" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the co... More Details

1.5" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the con... More Details

1.5" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and secu... More Details

1.5" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All s... More Details

1" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the conso... More Details

1" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All stu... More Details

2.5" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All s... More Details

2" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All stu... More Details

Adhesively Bonded Fastener Kit with AT 8040 Adhesive Kit Contains: (1) Plano Storage Box - 11" x 7.25" x 2.75" (50) AT-5 Tie Mount (White) (1) AT-8040 Adhesive (5) AT-850 Mixing Tip (1) AT-300 Dispens... More Details

Footman's Strap Mount The Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is... More Details