Select Category
General
Jr Products Mini Blind Brackets - 81915 - 342-81915F1
Snap shut front for easier use ID 1"H x 1"WMounting screws includedLifetime warranty
Jr Products Metal Floor Registers, White Undampered - 02-28945 - 342-0228945F1
Constructed of durable steel Long lasting powder coated colorsOEM replacement sizesEasy, one hand damper operationScrew hole for secure installationUndampered version has an extra collar depth for better air control
Jr Products Metal Floor Registers, White Undampered - 02-28925 - 342-0228925F1
Constructed of durable steel Long lasting powder coated colorsOEM replacement sizesEasy, one hand damper operationScrew hole for secure installationUndampered version has an extra collar depth for better air control
Jr Products Metal Floor Registers, White Dampered - 02-28905 - 342-0228905F1
Constructed of durable steel Long lasting powder coated colorsOEM replacement sizesEasy, one hand damper operationScrew hole for secure installation
Jr Products Metal Floor Registers, Brown Undampered - 02-28995 - 342-0228995F1
Constructed of durable steel Long lasting powder coated colorsOEM replacement sizesEasy, one hand damper operationScrew hole for secure installationUndampered version has an extra collar depth for better air control
Jr Products Metal Floor Registers, Brown Undampered - 02-28955 - 342-0228955F1
Constructed of durable steel Long lasting powder coated colorsOEM replacement sizesEasy, one hand damper operationScrew hole for secure installationUndampered version has an extra collar depth for better air control
Jr Products Metal Floor Registers, Brown Dampered - 02-28975 - 342-0228975F1
Constructed of durable steel Long lasting powder coated colorsOEM replacement sizesEasy, one hand damper operationScrew hole for secure installation
Jr Products Metal Floor Registers, Brown Dampered - 02-28915 - 342-0228915F1
Constructed of durable steel Long lasting powder coated colorsOEM replacement sizesEasy, one hand damper operationScrew hole for secure installation
Jr Products Low Pressure 2-Stage Automatic Changeover Regulator - 07-31525 - 342-0731525F1
Compact version Automatically redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder without interruptionGreen indicator dome changes to red when the service cylinder needs to be filled1/4" Inverted Flare Inlet Connections3/8" FPT Outlet ConnectionZinc Die CastMolded Rubber DiaphragmsUL Approved2nd Stage Relief Mechanism Per UL 144Powder Coated
Jr Products Low Pressure 2-Stage 195,000 Btu/Hr Lp Rv Gas Regulator - 07-30385 - 342-0730385F1
Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances. Combines both a high pressure first stage and a low pressure second stage regulator into one unit. Zinc Die CastMolded Rubber DiaphragmsUL Approved2nd Stage Relief Mechanism Per UL 144Adjustable Screw and Dust Cap DesignPowder Coated
Jr Products Low Pressure 2-Stage 195,000 Btu/Hr Lp Rv Gas Regulator - 07-30365 - 342-0730365F1
Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances. Combines both a high pressure first stage and a low pressure second stage regulator into one unit. Zinc Die CastMolded Rubber DiaphragmsUL Approved2nd Stage Relief Mechanism Per UL 144Adjustable Screw and Dust Cap DesignPowder Coated
Jr Products Large Sliding Eye Curtain Carrier, Type A - 81085 - 342-81085F1
Lifetime warranty.
Jr Products Kappet Screws With Covers, White, 14/Pk - 20415 - 342-20415F1
Can be used any where you need to secure an item with a screw but desire a clean, finished look. Special mounting screws included. Lifetime warranty.
Jr Products Kappet Screws With Covers, Beige, 14/Pk - 20425 - 342-20425F1
Can be used any where you need to secure an item with a screw but desire a clean, finished look. Special mounting screws included. Lifetime warranty.
Jr Products Interior Cable Tv Plate - 47785 - 342-47785F1
Interior Cable TV Plate has a 75 ohm F-Style connection. Works for any F-Style TV or satellite installations. Can be used in HD/Satellite TV connections. 2.34" x 4.50"
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-7903 - 342-Gsni7903F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-7145 - 342-Gsni7145F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-6687 - 342-Gsni6687F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-6642 - 342-Gsni6642F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.GSNI-6642 is used on truck caps.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-6624 - 342-Gsni6624F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-5300-60 - 342-Gsni530060F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-5300-50 - 342-Gsni530050F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-5300-40 - 342-Gsni530040F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-5300-30 - 342-Gsni530030F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-5300-20 - 342-Gsni530020F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
