Select Category
Plumbing & Sanitation
Valterra 10' Silverback Extension Hose - D04-0610 - 800-D040610F1
24 mil polypropylene with UV protection Durable, 100 mil. protective beadingStays flexible down to -20°FSprings back when compressedOuter bead for superior protection
Valterra 10' Low Profile Slunky Rv Drain Hose Support, Grey - S1000Glo - 800-S1000Glof1
The authentic drain hose support since 1976, designed with the traveler in mind, allows the hose to be curved around any obstacle between R.V. outlet and ground inlet while maintaining proper elevation to prevent fluid backup. Compact, light, and easily stored. Lifetime warranty. Deep pocket design provides enhanced stabilityMetal hinges for extra strength and long lifeAllows the hose to be curved around any obstacle while maintaining proper elevation for best drainageCompact, light and easily storedSelf-fastening strap for easy storageRidged bottom for gripping powerTie down straps included
Universal Drain Valve, Threade Bell Rvx - A01-2026Vp - 800-A012026Vpf1
Universal Drain Valve, Barbed, Bell Rvx - A01-2025Vp - 800-A012025Vpf1
Ultra-Fab 35946401 Rv Bumper Receiver Adapter - 35-946401 - 388-35946401F1
Fits 4" Square RV Bumpers Durable Powder Coated FinishAccepts 2" Carrier TubesZinc Plated Hardware IncludedNot Recommended For Towing
Type Iii Msd Waste Management System - 38110-0092 - 6-381100092F1
Provides an easy-to-install, all-inclusive solution consisting of a compact polyethylene holding tank and an integral Run-Dry Macerator Pump. The system has a touch-pad control panel to monitor waste levels and when required the user can activate the macerator pump to evacuate waste.
Twist It Sewer Hose Clamp Replaces P/N 117-39553 Rvx - 39553 - 17-39553F1
Tst Orng Pwr Toilet Treat Gal Replaces P/N 117-41197 Rvx - 41197 - 17-41197F1
Trident Straight Lpg Thru Fitting - 14388876 - 606-14388876F1
Meets ABYC Standard for non-abrasive and vaportight (non pressurized) seal of continuous length of LPG supply line passing 'Straight-Thru' watertight bulkheads and decks from inside cylinder locker to each appliance. Fits over andseals around 1/4" to 3/8" LPG copper tubing (before flare nuts attached) through bulkheads and decks up to 3/8" thick. 3 piece nylon construction with lock nut & BUNA-N sealing gland resists salt water, fuels, weak acids and common solvents. Properly installed it will withstand up to 70 PSI water pressure and working temperatures -22° to 212° F.
Trident Straight Lpg Thru Fitting - 1438-4439 - 606-14388439F1
Meets ABYC Standard for non-abrasive and vaportight (non pressurized) seal of continuous length of LPG supply line passing 'Straight-Thru' watertight bulkheads and decks from inside cylinder locker to each appliance. Slides over and seals around our LPG hose assemblies (except #40407 & 42421) through bulkhead or decks up to 1/2" thick. 3 piece nylon construction with lock nut & BUNA-N sealing gland resists salt water, fuels, weak acids and common solvents. Properly installed it will withstand up to 70 PSI water pressure and working temperatures -22° to 212° F. Cut 1.35" hole to install.
Trident Marine/Rv Lpg System Steel Tank - 14000005 - 606-14000005F1
Made from high quality steel that has been primed and electrostatically painted.
Trident Disposable Propane Cylinder Adapter - G487 - 606-G487F1
Simply connect the POL fitting to a female POL adapter fitting then connect a disposable bottle to the female adapter fitting. Solid brass.
Trident 16021720 Roto Molded Lpg Cylinder Locker, Dual 20# - 1602-1720 - 606-16021720F1
Constructed of a UV protected molded polymer. Double walled lid for added toughness along with stainless steel hardware, and durable latching system and foam seal. Can be used with 17 lb. Viking Cylinders or 20 lb. Steel Cylinder.Complete with: regulator assembly with leak test gauge, QCC (Quick close) pigtail, brass solenoid valve, Trident basic control panel, 2 straight thru fittings for hose and wiring and thru hull fitting for venting. LPG Cylinder Sold Separately.
Trident 16011720 Roto Molded Lpg Cylinder Locker, Single 20# - 16011720 - 606-16011720F1
Constructed of a UV protected molded polymer. Double walled lid for added toughness along with stainless steel hardware, and durable latching system and foam seal. Can be used with 17 lb. Viking Cylinders or 20 lb. Steel Cylinder.Complete with: regulator assembly with leak test gauge, QCC (Quick close) pigtail, brass solenoid valve, Trident basic control panel, 2 straight thru fittings for hose and wiring and thru hull fitting for venting. LPG Cylinder Sold Separately.
Trident 1420-0022 Marine/Rv 22 Lb Transparent Composite Propane Cylinder - 1420-0022 - 606-14200022F1
High strength, composite LPG cylinders are light weight and maintenance free. A special fiberglass construction allows you to see the level of propane in the cylinder. They are just what recreational and commercial users need to end unsightly and dangerous rust and corrosion. Manufactured to D.O.T. and T.C specifications. OPD, new Type 1 valve. Dimensions are approximate.
Trident 1420-0017 Marine/Rv 17 Lb Transparent Composite Propane Cylinder - 1420-0017 - 606-14200017F1
High strength, composite LPG cylinders are light weight and maintenance free. A special fiberglass construction allows you to see the level of propane in the cylinder. They are just what recreational and commercial users need to end unsightly and dangerous rust and corrosion. Manufactured to D.O.T. and T.C specifications. OPD, new Type 1 valve. Dimensions are approximate.
Trident 1420-0011 Marine/Rv 11 Lb Transparent Composite Propane Cylinder - 14200011 - 606-14200011F1
High strength, composite LPG cylinders are light weight and maintenance free. A special fiberglass construction allows you to see the level of propane in the cylinder. They are just what recreational and commercial users need to end unsightly and dangerous rust and corrosion. Manufactured to D.O.T. and T.C specifications. OPD, new Type 1 valve. Dimensions are approximate.
Trident 1410-0020 Marine/Rv Lpg System 5 Gallon Aluminum Tank - 14100020 - 606-14100020F1
Made out of high strength aluminum that is corrosion free and rust free forever. Dimensions are approximate.
Trident 1410-0010 Marine/Rv Lpg System 2.4 Gallon Aluminum Tank - 1410-0010 - 606-14100010F1
Made out of high strength aluminum that is corrosion free and rust free forever. Dimensions are approximate.
Trident 130077054 Marine Propane Control System, With 1/4" 12V Solenoid - 1300-7705.4-Kit - 606-130077054F1
CE Certified Gas Control Panel has green ON indicator light & red OFF indicator light. Draws 953 M.A. when ON and gas is in service. Panel can operate on 24VDC with the use of 24VDC Solenoid.
Trident 130077053 Marine Propane Control System, With 3/8" 12V Solenoid - 1300-7705.3-Kit - 606-130077053F1
CE Certified Gas Control Panel has green ON indicator light & red OFF indicator light. Draws 953 M.A. when ON and gas is in service. Panel can operate on 24VDC with the use of 24VDC Solenoid.
Trident 1300-7761-Kit Lpg 12V Control & Detection System With 10' Connect Cable - 1300-7761 Kit - 606-13007761Kitf1
Turns LP Gas ON or OFF at the solenoid valve on the L.P. Gas regulator assembly from inside the galley. Simple to install. Continuously monitors area(s) for presence of gas fumes. Automatically turns off (closes) the solenoid valve and activates an audio alarm. Red alarm indicator lights if a gas fume is detected at 20% lower explosion limit (LEL). System allows for up to 3 L.P. Gas Detectors to independently monitor area(s) for presence of gas fumes.Kit includes:12 Volt DC control panel"Low pressure" 3/8" solenoid10' quick connect cableDetection unit2 brass fittings to connect the solenoid
Trident 1230-1411 Marine Lpg Wall Mount Two Stage Regulator - 12301411 - 606-12301411F1
Low pressure regulators that meet ABYC marine standard with gauge for required LPG system leak test. UL listed die cast zinc body. Regulators connnect to propane tank with 20" pigtail hose.
