Transducer Accessories

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)... More Details

Fairing Block for B744V Fairings orient the sound beam straight down by mounting the transducer parallel to the water surface. Features: Fairing: High-Performance Dimensions: 13.6” x 3” x 3” This prod... More Details

Fairing Block for B122 & DST-800L A replacement high-speed fairing block for the B122. This fairing can also be used for the DST800L. Dimensions: 13.5" L x 2.94" W x 2.96" T. This product may not be r... More Details

Deadrise Angle Finder - Accuracy of ± 1/2° Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome ... More Details

Chirp Junction Box for Raymarine CP470 Type Connector Airmar adapter box for single-band or dual-band CHIRP tranducers, with Raymarine 11-pin connector. This product may not be returned to the origina... More Details

B45 Standard Low-Speed Fairing Block Airmar's Standard Low-Speed Fairing Block for B45.  Specifications: Dimensions: 4.25” x 2.37” x 1.87” This product may not be returned to the original point of pur... More Details

B258, SS258 High Speed Fairing Block Airmar High Speed Fairing block for B258, SS258 Style TransducerThis product may not be returned to the original point of purchase. Please contact the manufacturer... More Details

75WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75W... More Details

75WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. W... More Details

75WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench. For use ... More Details

75WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wren... More Details

6M Extension Cable for Mix & Match Chirp Transducers - 12-Pin  Connects to Airmar's Mix & Match 12-Pin chirp transducer; then add your Mix & Match Sonar Cable. More Details

60WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 60W... More Details

60WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. W... More Details

60WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For u... More Details

60WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wren... More Details

3M Extension Cable for Mix & Match Chirp Transducers - 12-Pin  Connects to Airmar's Mix & Match 12-Pin chirp transducer; then add your Mix & Match Sonar Cable. More Details

175WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164... More Details

164WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ... More Details

164WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use wit... More Details

164WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wre... More Details

117WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze... More Details

117WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ... More Details

117WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For... More Details

117WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wre... More Details