Select Category

Acrylic Adhesive CAN NOT SHIP AIR,UPS GROUND ONLY AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minu... More Details

AT-14 1 to 1 Adhesive Gun Plunger for AT-2010, AT-4020 & AT-6030 Adhesives AT-14 is specifically for Weld Mount AT-2010, AT-4020, and AT-6030 adhesives. (sold separately) Product Specifications Dimens... More Details

AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - Single Single Pack gun plunger for AT-6030 Adhesive (sold separately). Product Specifications Dimensions9" L × 4" W × 1" HShipping Weight0.5 lb Accessorie... More Details

10:1 Gun Plunger for AT-6030 Adhesive 10 Pack Gun Plunger for AT-6030 Adhesive (sold separately) Product Specifications Dimensions8" L × 5" W × 2" HShipping Weight0.5 lb Accessories SKU 106701 — MFG# ... More Details

Footman's Strap Mount The Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is... More Details

Footman's Strap Mount The Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is... More Details

Adhesively Bonded Fastener Kit with AT 8040 Adhesive Kit Contains: (1) Plano Storage Box - 11" x 7.25" x 2.75" (50) AT-5 Tie Mount (White) (1) AT-8040 Adhesive (5) AT-850 Mixing Tip (1) AT-300 Dispens... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

Mixing Tips Only Part #:817-8085050Manufacturer:WELDMOUNT (CANADA ONLY)Manufacturer Part #:AT-850-50Order In Multiples Of:1DescriptionAT-850 mixing tipsPack50 Variations817-008040Weld Mount 008040 AT-... More Details

Mixing Tips Only Part #:817-80850Manufacturer:WELDMOUNT (CANADA ONLY)Manufacturer Part #:AT-850-10Order In Multiples Of:1DescriptionAT-850 mixing tipsPack10 Variations817-008040Weld Mount 008040 AT-80... More Details

An anodized aluminum base with a nylon tie mount riveted to the base. The nylon mount swivels 360°, making alignment with the wire harness easier. Designed for a #5 wire tie and has an average pull st... More Details

Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications... More Details

Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications... More Details

Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications... More Details

8040 Acrylic Adhesive with Plunger  AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto a cl... More Details

For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for run... More Details

For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for run... More Details

For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for run... More Details

The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10:1 plunger). Replacement plungers are also avail... More Details

2" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All stu... More Details

2.5" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All s... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details