Select Category
_0x200.jpg)
Weld Mount AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & 6030
Weld Mount 83224100 Stainless Steel Threaded Studs, 8-32 X 3/4", 100/Case - Ps62-832-24Ss-100 - 817-83224100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 83212100 Stainless Steel Threaded Studs, 8-32 X 3/4", 100/Case - Ps62-832-12Ss-100 - 817-83212100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 8085050 Mixing Tips Only For At-8040 Bonder, 50/Pk - At-850-50 - 817-8085050F1
Mixing Tips Only
Weld Mount 80850 Mixing Tips Only For At-8040 Bonder, 10/Pk - At-850-10 - 817-80850F1
Mixing Tips Only
Weld Mount 807100 At- 7 Aluminum Base Wire Tie Mount, 100/Case - At-7-100 - 817-807100F1
An anodized aluminum base with a nylon tie mount riveted to the base. The nylon mount swivels 360°, making alignment with the wire harness easier. Designed for a #5 wire tie and has an average pull strength of 150 Lbs.
Weld Mount 805950Bk At-5 Large Nylon Wire Tie Mount, Black, 50/Pack - At-5B-50 - 817-805950Bkf1
Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications. No need for plywood in the hull just to have a place to drive wire tie screws. Saves material and labor costs!
Weld Mount 805950 At-5 Large Nylon Wire Tie Mount, White, 50/Pack - At-5-50 - 817-805950F1
Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications. No need for plywood in the hull just to have a place to drive wire tie screws. Saves material and labor costs!
Weld Mount 805900Bk At-5 Large Nylon Wire Tie Mount, Black, 100/Pack - At-5B-100 - 817-805900Bkf1
Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications. No need for plywood in the hull just to have a place to drive wire tie screws. Saves material and labor costs!
Weld Mount 803950Bk At-3 Small Nylon Wire Tie Mount, Black, 50/Pack - At-3-50B - 817-803950Bkf1
For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for runs with only a few wires or in limited space. Excellent for mounting compass wires on center console boats and for overhead panel runs.
Weld Mount 803950 At-3 Small Nylon Wire Tie Mount, White, 50/Pack - At-3-50 - 817-803950F1
For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for runs with only a few wires or in limited space. Excellent for mounting compass wires on center console boats and for overhead panel runs.
Weld Mount 803900Bk At-3 Small Nylon Wire Tie Mount, Black, 100/Pack - At-3-100B - 817-803900Bkf1
For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for runs with only a few wires or in limited space. Excellent for mounting compass wires on center console boats and for overhead panel runs.
Weld Mount 803001 At-300 Adhesive Dispensing Gun - At-300 - 817-803001F1
The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10:1 plunger). Replacement plungers are also available. Dries gold.
Weld Mount 142032100 Stainless Steel Threaded Studs, 1/4-20 X 2", 100/Case - St-125-1420-32Ss-100 - 817-142032100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 142020100 Stainless Steel Threaded Studs, 1/4-20 X 1-1/4", 100/Case - St125-1420-20Ss-100 - 817-142020100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 142016100 Stainless Steel Threaded Studs, 1/4-20 X 1", 100/Case - St125-1420-16Ss-100 - 817-142016100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
