Ram Mounts
Waterproof Wireless Charger Disc - Ram-B-400-A-Un14W-V7M-1 - 170-Rmb400Aun14Wv7M1F1
Unpk Ram Rod 2000 Holder W/Deck Track Mount - Ram-114-Du - 170-Ram114Duf1
Post Length: 6"Hardware included: (2) 1/4"-20 x 5/8" Knobs, (2) 1/4"-20 Nuts
Ram® Ramb101Lo11 1" Double Ball Mount For Lowrance Elite-4, Hook-4 & Mark-4 Fishfinders - Ram-B-101-Lo11 - 170-Ramb101Lo11F1
The RAM-B-101-LO11 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and adapter base that inserts directly to the back of Lowrance Elite-4, Mark-4 and Hook-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Ram® Ram108D Trolling Motor Stabilizer, 9" Arm - Ram-108-D - 170-Ram108Df1
A single strap base attaches to your trolling motor shaft and connects to a standard double socket arm and a 2.5" diameter round base. Effectively eliminates vibration from your trolling motor, the stabilizer fits trolling motor shafts from 0.5" - 2" dia. Protects the shaft, mount, and head of your motor from damage. Ideal for anglers with bow-mounted trolling motors.
Ram® Ram108 Trolling Motor Stabilizer, 5-1/2" Arm - Ram-108 - 170-Ram108F1
A single strap base attaches to your trolling motor shaft and connects to a standard double socket arm and a 2.5" diameter round base. Effectively eliminates vibration from your trolling motor, the stabilizer fits trolling motor shafts from 0.5" - 2" dia. Protects the shaft, mount, and head of your motor from damage. Ideal for anglers with bow-mounted trolling motors.
Ram® Ram101Lo11 1.5" Double Ball Mount For Select Lowrance Elite-5, Elite 7 Ti/Ti®, Hook & Mark-5 Fishfinders - Ram-101-Lo11 - 170-Ram101Lo11F1
The RAM-101-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti®, HOOK-3, HOOK-4, HOOK-5 and MARK-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Ram-Tube™ 2008 Fishing Rod Holder With Round Flat Surface Base - Rap-119 - 170-Rap119F1
The RAP-119 consists of the RAM-TUBE™ 2008 fishing rod holder and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball and socket feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. The RAM-TUBE™ 2008 tube holder integrates the patented rubber ball and socket design with a self draining and quick to access tube for the butt of most any fishing rod. The tube is made of extremely durable composite. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water.Tube Dimensions:Inner diameter: 1.9"Inner tube length: 10" (from bottom to top of lip)
Ram-Rod™ Rail Mount Adapter Kit - Ram-114Rm - 170-Ram114Rmf1
The rail mount adapter for the RAM-114BMU base; this adapter joins to base plates with the screws provided and turns the flate base into a rail base. The adapter is a U shape, so it can wrap around a tube mount and the clamp by joining to the flat base.
Ram-Rod™ Flush Base For Spline Posts - Ram-114Fmu - 170-Ram114Fmuf1
The RAM-114FMU contains 4 pre-drilled holes and a socket compatible with RAM-ROD™ and RAM-TUBE™ holders with a spline post.
Ram-Rod™ Combination Bulkhead/Flat Surface Base With Plunger For Spline Posts - Ram-114-Bmp - 170-Ram114Bmpf1
The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Compatible with RAM post and spline rod holders and RAM wedge mount ball adapters.
Ram-Rod™ 8" Post Extension Arm - Rap-114-Pau - 170-Rap114Pauf1
Get your fishing rod closer to you, closer to the action, or simply out of the way with this latest extension from RAM. Rugged, high strength composite construction ensures years of performance on the water. The rod holder extender will lift your RAM-ROD™ holder up off of your deck and enable ideal positioning in tight spaces such as on kayaks. This extender is perfect for increasing the rod holder height when using a side mounted gunnel or transom mount.
Ram-Rod™ 2007 Fishing Rod Holder With Rectangle Flat Surface Base - Rap-340 - 170-Rap340F1
The RAM-ROD™ 2007 rod holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the RAM patented 1.5" ball, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. The ball and socket enable fine adjustment without the need to loosen a knob which is ideal for making small adjustments as your fishing scenario changes throughout the day. Includes 1.5" ball with a 2" x 2.5" flat surface mounting base.
Ram-Rod™ 2000 Fishing Rod Holder With Flush Mounting Base - Ram-114-F - 170-Ram114Ff1
The RAM-114-F, high strength composite fishing rod holder with flush base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Ram-Rod™ 2000 Fishing Rod Holder With Bulkhead Mounting Base - Ram-114-B - 170-Ram114Bf1
The RAM-114-B, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Ram-Rod® Hd Fishing Rod Holder - Rap-433-Bmp - 170-Rap433Bmpf1
Compatible with both spinning and casting reels, specifically designed for rugged environments and large fishing rods. It features a rotating ring to keep your rod in place and a swing arm rod stop that can convert it into a tube style rod holder. Compatible with the C-Size and B-Size hex ball bases. Includes a 6" spline post and bulkhead/flat surface mounting base. Also GoPro® compatible - just attach your GoPro factory mount directly to the rod holder or use the Double Ball Mount to attach any action camera. If you want to mount your phone to utilize your mobile fishfinder app, use the Double Ball Mount with X-Grip®.
Ram X-Grip® Phone Mount - Ram-Hol-Un7Bu - 170-Ramholun7Buf1
Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.875" (Minimum Height = 4.25")Maximum Width = 3.25" (Minimum Height = 2.25")Depth = 0.875"
Ram Universal X-Grip® Large Phone/Phablet Cradle - Ram-Hol-Un10Bu - 170-Ramholun10Buf1
The RAM-HOL-UN10BU has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip® IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.75" (Minimum Height = 5.5")Maximum Width = 4.5" (Minimum Height = 3.25")Depth = 0.875"
Ram Universal Finger-Grip™ Phone/Radio Cradle - Ram-Hol-Un4U - 170-Ramholun4Uf1
The RAM-HOL-UN4U is designed to hold a large amount of cell phones and electronic devices. The cradle comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the cradle includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including samsung accessories and lg accessories. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns.Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Ram Twist Lock Suction Cup Mount With Universal X-Grip® Large Phone/Phablet Cradle - Ram-B-166-Un10 - 170-Ramb166Un10F1
The RAM-B-166-UN10 consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for 5" large phones and phablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the mount to your optimum viewing position. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 5" phone or phablet. Included are easy access grip knobs for quick insertion and release of your handheld device.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.X-Grip® Dimensions:Minimum Width = 1.75" (Minimum Height = 5.5")Maximum Width = 4.5" (Minimum Height = 3.25")Depth = 0.875"
Ram Twist Lock Suction Cup Mount With Universal X-Grip® Cell/Iphone Cradle - Ram-B-166-Un7 - 170-Ramb166Un7F1
The RAM-B-166-UN7 consists of a 3.3" diameter suction cup twist lock base, standard length double socket arm and universal spring loaded X-Grip® cradle for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.875" (Minimum Height = 4.25")Maximum Width = 3.25" (Minimum Height = 2.25")Depth = 0.875"
Ram Tough-Claw™ Mount With Level Cup™ Drink Holder - Ram-B-132-400U - 170-Ramb132400Uf1
Tough-Claw™ base and RAM Level Cup™ Self-Leveling Drink Holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Mount rotates 360°. The integrated eyelet and hook provide an optional tethering function, securing any small or open container in any harsh environment. The RAM Tough-Claw™ is the perfect mounting base for quick and easy nstallation and removal on round, square, odd shaped rails and bars and flat surfaces. Easy installation in many applications including motorcycles, kayaks and boats, bicycles, wheelchairs and more. Compatible with any cups, cans, bottles or mugs ranging from 2.5" - 3.5" diameter. Koozie is included.Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14"
Ram Tough Claw™ Base W/Double Socket Arm And 1.5" Round Base Adapter - Rap-400-202 - 170-Rap400202F1
The RAP-400-202 consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.Clamping Range (Rail/Tube Surfaces):0.625" to 1.5"Clamping Range (Flat Surfaces):0" to 1.14"
Ram Standard Length Double Socket Arm For 1.5" Balls - Ram-201 - 170-Ram201F1
The RAM-201, standard length double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.Dimensions:Overall Length: 5.625"Socket-To-Socket Length: 4.5"
Ram Small Tough-Claw™ With 1" Diameter Rubber Ball - Rap-B-400U - 170-Rapb400Uf1
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 0.625" to 1.5"Clamping Range (Flat Surfaces): 0" to 1.14" Physical Dimensions:Height: 4.25", Width: 1.18"
Ram Small Tough-Claw™ With 1.5" Diameter Rubber Ball - Rap-400U - 170-Rap400Uf1
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 0.625" to 1.5"Clamping Range (Flat Surfaces): 0" to 1.14"Physical Dimensions: Height: 4.81", Width: 1.18"
