Ram Mounts
1.5" Ball Quick Release Kayak Track Base - Rap-383U - 170-Rap383Uf1
For the serious kayak angler, the RAM Quick Release Track Base is a universal mounting solution for a wide variety of kayak products including RAM fishing rod holders, camera and transducer deployment arms. Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten the base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water. Track Dimensional Range: .250" MIN. - .562" MAX. High strength composite. Quick release and installationEasily relocate adapter along track, can be installed at any point on the trackHigh strength materials ensure product longevityCompatible with RAM-ROD™ holders with 1.5" ball and any 1.5" RAM accessoryLifetime warranty
2-1/4" Ball Mount W/3" X 11" Base Short Arm - Ram-D-111U-C - 170-Ramd111Ucf1
A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
2.25" Diameter Ball Mount - Ram-D-111U-E - 170-Ramd111Uef1
A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Mixed Combination Pin-Lock™ Security Kit - Rap-S-Knobg-109 - 170-Rapsknobg109F1
The RAP-S-KNOBG-109-1 includes Pin-Lock™ security knobs/keys for double swing arms and Gimbal brackets. The RAP-S-KNOBG-109-1 offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOBG-109-1 is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM® mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering. High strength composite.
Pin-Lock™ Security Kit For 1" Ball Mounts - Rap-S-Knob3-G - 170-Rapsknob3Gf1
The RAP-S-KNOB3-G includes Pin-Lock™ security knobs/keys for double socket arms and Gimbal brackets. The RAP-S-KNOB3-G offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB3-G is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM® mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.
Ram 1.5" Ball Mount For Humminbird Helix 5 - Ram-202-153-B-202 - 170-Ram202153B202F1
Powder coated marine grade aluminum mount. The round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to 10 pounds.
Ram 1.5" Ball Mount W/Long Double Socket Arms - Ram-111U-D - 170-Ram111Udf1
Consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, a double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Made of Powder Coated Marine Grade Aluminum.
Ram 1.5" Ball Mount W/Short Double Socket Arms - Ram-111U-B - 170-Ram111Ubf1
Consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, a double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Made of Powder Coated Marine Grade Aluminum.
Ram 1.5" Ball Mount With 2.5" Round Base & 2" X 4" Plate For The Humminbird Helix 7 Only - Ram-202-24-202 - 170-Ram20224202F1
The RAM-202-24-202, powder coated marine grade aluminum mount, consists of a double socket arm mount, one round 2.5" diameter round base with the universal AMPS hole pattern and one 2" x 4" rectangular base. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.Compatible Devices: Humminbird Helix 7Overall Length: 7.35"Weight Capacity: Up to 10 lbs.
Ram 1.5" Ball Mount With 2.5" Round Base, Short Arm & 2" X 4" Plate For The Humminbird Helix 7 Only - Ram-202-24-B-202 - 170-Ram20224B202F1
The RAM-202-24-B-202, powder coated marine grade aluminum mount, consists of a short double socket arm mount, one round 2.5" diameter round base with the universal AMPS hole pattern and one 2" x 4" rectangular base. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.Compatible Devices: Humminbird Helix 7Overall Length: 5.225"Weight Capacity: Up to 10 lbs.
Ram 1" Ball Mount With Double Socket Arm & Round Base - Ram-B-138U - 170-Ramb138Uf1
The RAM-B-138U consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, double socket arm and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device.
Ram 1/2" To 1-1/2" Rail Base W/1" Ball - Ram-B-231 - 170-Ramb231F1
Rail Base with Stainless Steel U Bolt.
Ram 2-1/4" Ball Mount W/3" X 11" Base & 3-3/4" Base W/Hi-Torq™ Wrench - Ram-D-111-C-Knob9H - 170-Ramd111Cknob9Hf1
A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.Includes the RAM Hi-Torq™ Wrench; designed to give an extra tight grip with the knob on "D" size ball arms and mounts. Ideal when using the RAM mounts in cold weather or if you just want extra torgue.
Ram 2.5" Ball Mount Round Base & 1.5" X 3" Rectangular - Ram-202-153-202 - 170-Ram202153202F1
Consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to ten pounds. Hardware for mounting to device not included with purchase.
Ram Ball Mount For Select Humminbird And Lowrance, 1-1/2" - Ram-107 - 170-Ram107F1
Ball Mount
Ram Ball Mount For Select Humminbird And Lowrance, 1" - Ram-B-107U - 170-Ramb107F1
Ball Mount
Ram Ball Mount For Select Humminbird, Eagle And Lowrance, 1" - Ram-B-107-1 - 170-Ramb1071F1
Ball Mount
Ram Ball Universal Mount With 6-1/4" X 2" Plate, 1-1/2" Ball - Ram-111 - 170-Ram111F1
Black powder coated marine grade aluminum. The RAM-111 consists of a 2.5" diameter round base that contains the universal AMPs hole pattern. Double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Ram Ball Universal Mount With 6-1/4" X 2" Plate, 1" Ball - Ram-B-111 - 170-Ramb111F1
Black powder coated marine grade aluminum. The RAM-111 consists of a 2.5" diameter round base that contains the universal AMPs hole pattern. Double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Ram Double Socket Arm For 1" Ball - Ram-B-201 - 170-Ramb201F1
The RAM-B-201, STANDARD length double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.Dimensions: Overall Length: 3.69"Socket-To-Socket Length: 3"
Ram Double Socket Arm For 1" Balls - Ram-B-201U - 170-Ramb201Uf1
The RAM-B-201U, STANDARD length double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.Dimensions:Overall Length: 3.69"Socket-To-Socket Length: 3"
Ram Flat Surface Mount With Long Double Socket Arm & Universal X-Grip® Cradle For 10" Large Tablets - Ram-B-101-C-Un9 - 170-Ramb101Cun9F1
The RAM-B-101-C-UN9 consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal X-Grip® clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®.Cradle Dimensions:Minimum Width = 6.25"Maximum Width = 8.1"Depth = 0.875"Maximum Length (using additional supports) = 10.25"
