West Systems
Wooden Boat Restoration & Repair Manual - 002-970 - 655-002970F1
This manual shows you how to do professional level repairs and renovations that dramatically extend the life of your wooden boat. Dry rot repairs, stuctural frame repairs, and plank repairs using modern products and techniques are among the many solutions covered in this fully illustrated manual. Softcover 80 pages.
White Pigment 4 Oz. - 501-8 - 655-5018F1
Epoxy based liquid colorants used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl. oz. of epoxy. One 4 fl. oz. bottle will tint approximately 1-1/2 gal. of epoxy. Pigmented epoxy will degrade under sunlight-not intended as an exterior finish.
West System User Manual - 2950 - 655-002950F1
The latest up-to-date information on WEST SYSTEM products. Covers epoxy resin, hardeners, additives, reinforcing materials, tools and supplies.
West System G/Flex Epoxy Kit, 4 Oz. (2Ea 4 Oz. Bottles) - C-650-K - 655-C650Kf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs. 650-K G/Flex Aluminum Kit: Contains 4 fl. oz. G/Flex 650 resin, 4 fl. oz. G/Flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams adhesive filler, 4 mixing cups, 1pair disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.
West System G/Flex Epoxy Kit, 4 Oz. (2Ea 4 Oz. Bottles) - 650-K - 655-650Kf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.650-K G/Flex Aluminum Repair Kit: Contains 4 fl. oz. G/Flex 650 resin, 4 fl. oz. G/Flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams adhesive filler, 4 mixing cups, 1pair disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.
West System G/Flex Epoxy Bottles, 8 Oz. (2Ea 4 Oz. Bottles) - C-650-8 - 655-C6508F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex Epoxy Bottles, 8 Oz. (2Ea 4 Oz. Bottles) - 650-8 - 655-6508F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex Epoxy 2 Gallon Kit (2Ea Gal. Cans) - C-650-2G - 655-C6502Gf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex Epoxy 2 Gallon Kit (2Ea Gal. Cans) - 6502G - 655-6502Gf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex C65032 Epoxy, 32 Oz. (2Ea 16 Oz. Bottles) - C-650-32 - 655-C65032F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex 65032 Epoxy, 32 Oz. (2Ea 16 Oz. Bottles) - 65032 - 655-65032F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System C209Sc Extra Slow Hardener, 5.3 L (1.4 Gallon) - C-209-Sc - 655-C209Scf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System C209Sb Extra Slow Hardener, 1.24 L (42.2Oz.) - C-209-Sb - 655-C209Sbf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System C209Sa Extra Slow Hardener, 315 Ml (10.6 Oz.) - C-209-Sa - 655-C209Saf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System C207Sc Special Clear Hardener, 5.49 L (1.4 Gallon) - C-207-Sc - 655-C207Scf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System C207Sb Special Clear Hardener, 1.24 L (42.2Oz.) - C-207-Sb - 655-C207Sbf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System C207Sa Special Clear Hardener, 315 Ml (10.6 Oz.) - C-207-Sa - 655-C207Saf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System C205 Hardener, 814 Ml (27.5 Oz.) - C-205-B - 655-C205Bf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 42.81 L (11.31 Gal) - C-205-E - 655-C205Ef1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 3.56 L (.94 Gal) - C-205-C - 655-C205Cf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 208 Ml (7 Oz.) - C-205-A - 655-C205Af1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C105E Resin - 197 L (52.03 Gal) - C-105-E - 655-C105Ef1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105C Resin - 16.46 L (4.35 Gal) - C-105-C - 655-C105Cf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105B Resin - 3.74 L (.98 Gal) - C-105-B - 655-C105Bf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105A Resin - 946 Ml (32 Oz.) - C-105-A - 655-C105Af1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
