West Systems
High Density Filler-43 Oz. - 404-45 - 655-40445F1
A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White color.
High Density Filler-30 Lb - 404-B - 655-404Bf1
A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White color.
Handy Repair Pack - 101 - 655-101F1
101: Here is everything you need to complete small repairs around the boat, shop or home. Contains two 105 Resin/205 Fast Harderner packets, and enough adhesive filler to complete a variety of coating and bonding operations. Aslo included is a 2" x 10" piece of 9 oz fiberglass tape (useful for patching, reinforcing or abrasion resistance), an application brush, mixing stick, pipe cleaner, two cleaning pads and complete instructions. The components can be mixed in the disposable package.
Gray Pigment 4 Oz. - 503-8 - 655-5038F1
Epoxy based liquid colorants used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl. oz. of epoxy. One 4 fl. oz. bottle will tint approximately 1-1/2 gal. of epoxy. Pigmented epoxy will degrade under sunlight-not intended as an exterior finish.
Graphite Powder - 423 - 655-423F1
A very fine black powder which can be mixed with WEST SYSTEM epoxy to produce a low friction exterior coating surface. Increases scuff resistance and durability. Mixture is also used on rudders, centerboards and racing craft bottoms that are dry sailed. Is not an antifoulant. Provides a mar resistant surface. Mixture can be used on teak deck construction to simulate traditional caulking and to protect resin from sunlight. Add up to 10% by volume or 8 fl. oz. of epoxy.
Gougeon Brothers On Boat Construction Book - 2 - 655-002F1
Hardcover. 406 pages.Extensive chapters on hardware bonding, construction methods, safety and tools are described with the aid of hundreds of detailed illustrations and photographs. Used as a textbook in boatbuilding schools.
G/Flex Thickened Epoxy, 8 Oz. 2/Kit - C-655-8 - 655-C6558F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
G/Flex Thickened Epoxy, 8 Oz. 2/Kit - 655-8 - 655-6558F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
G/Flex 655 Epoxy Adhesive Repair Kit, 2 Quarts - 6552Qt - 655-6552Qtf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
G/Flex 655 Epoxy Adhesive Repair Kit, 2 Gallons - 655-2G - 655-6552Gf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
G/Flex 655 Epoxy Adhesive Repair Kit, 1 Oz. - 655-1 - 655-6551F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.655-K G/Flex Plastic Boat Repair Kit: A thickened, easy-to-use epoxy that permanently bonds fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/Flex is toughened to make structural bonds that absorb the stresses of expansion, contraction, shock and vibration. Glue resinous woods, exotic woods and a wide range of dissimilar materials. Repair aluminum, plastic and wooden boats, kayaks and canoes. Kit Contains 4-1/2 fl. oz. G/Flex 655 resin, 4-1/2 fl. oz. G/Flex 655 hardener (9 fl. oz. of mixed epoxy), 2 reusable mixing stick/applicators, 4 alcohol cleaning pads, 1 pair disposable neoprene gloves, 10 mixing palettes and complete handling and repair instructions.
G/Flex 655 Epoxy Adhesive Repair Kit - C-655-K - 655-C655Kf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs. 655-K G/Flex Plastic Boat Repair Kit: A thickened, easy-to-use epoxy that permanently bonds fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/Flex is toughened to make structural bonds that absorb the stresses of expansion, contraction, shock and vibration. Glue resinous woods, exotic woods and a wide range of dissimilar materials. Repair aluminum, plastic and wooden boats, kayaks and canoes. Kit Contains 4-1/2 fl. oz. G/Flex 655 resin, 4-1/2 fl. oz. G/Flex 655 hardener (9 fl. oz. of mixed epoxy), 2 reusable mixing stick/applicators, 4 alcohol cleaning pads, 1 pair disposable neoprene gloves, 10 mixing palettes and complete handling and repair instructions.
G/Flex 655 Epoxy Adhesive Repair Kit - 655-K - 655-655Kf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.655-K G/Flex Plastic Boat Repair Kit: A thickened, easy-to-use epoxy that permanently bonds fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/Flex is toughened to make structural bonds that absorb the stresses of expansion, contraction, shock and vibration. Glue resinous woods, exotic woods and a wide range of dissimilar materials. Repair aluminum, plastic and wooden boats, kayaks and canoes. Kit Contains 4-1/2 fl. oz. G/Flex 655 resin, 4-1/2 fl. oz. G/Flex 655 hardener (9 fl. oz. of mixed epoxy), 2 reusable mixing stick/applicators, 4 alcohol cleaning pads, 1 pair disposable neoprene gloves, 10 mixing palettes and complete handling and repair instructions.
G/5 Adhesive Two-Part 1/4 Pt - C-865-4 - 655-C8654F1
An easy to use 2-part system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts together while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long term bonds subject to high loads or moisture. Cures in 3-5 minutes.
G/5 Adhesive Two-Part 1/4 Pt - 865-4 - 655-8654F1
An easy to use 2-part system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts together while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long term bonds subject to high loads or moisture. Cures in 3-5 minutes.
G/5 Adhesive Two-Part 1 Pt. - C-865-16 - 655-C86516F1
An easy to use 2-part system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts together while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long term bonds subject to high loads or moisture. Cures in 3-5 minutes.
G/5 Adhesive Two-Part 1 Pt. - 865-16 - 655-86516F1
An easy to use 2-part system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts together while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long term bonds subject to high loads or moisture. Cures in 3-5 minutes.
Filleting Blend - 405 - 655-405F1
A strong, wood-toned filler good for use in glue joints and fillets on naturally-finished wooden interiors. The improved formula mixes easily with epoxy and allows for smooth fillets with little sanding. Consistent brown and can be used to modify other shades of WEST SYSTEM fillers.
Fillable Caulking Tubes (2/Pk) - 810-2 - 655-8102F1
Large-volume applicators for use with a standard caulking gun. Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Suitable for refilling during continuous use. Should be disposed of after epoxy cure.
Fillable Caulking Tube (24/Bx) - 810-24 - 655-81024F1
Large-volume applicators for use with a standard caulking gun. Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Suitable for refilling during continuous use. Should be disposed of after epoxy cure.
Fiberglass Boat Repair Kit - C-105-K - 655-C105Kf1
Repairs minor cracks and holes. Repairs scrapes and dings. Makes high-strength bonds and re-attaches loose hardware . This kit includes all the materials required to complete a range of repairs to fiberglass boats. Contains: 105 Resin/205 Fast Hardener packets, adhesive filler and adhesive fairing, mixing cups, reusable mixing stick, nitrile gloves, glue brushes, syringe, biaxial glass tape, plain weave glass tape, and detailed, illustrated instructions.
Fiberglass Boat Repair Kit - 105-K - 655-105Kf1
Repairs minor cracks and holes. Repairs scrapes and dings. Makes high-strength bonds and re-attaches loose hardware . This kit includes all the materials required to complete a range of repairs to fiberglass boats. Contains: 105 Resin/205 Fast Hardener packets, adhesive filler and adhesive fairing, mixing cups, reusable mixing stick, nitrile gloves, glue brushes, syringe, biaxial glass tape, plain weave glass tape, and detailed, illustrated instructions.
F/G Boat Repair & Maintenance Manual - 002-550 - 655-002550F1
A comprehensive guide. Including detailed instructions on repairing delamination, keel damage and gelcoat blisters. Also covers fairing keels for better performance, hardware bonding, finishing and installing teak veneers on decks, hatches and cabin tops. Softcover. 84 pages. Over 40 drawings and photographs.
Disposable Gloves, 50 Pr. - 832-50 - 655-83250F1
Lightweight and seamless. Tough neoprene for excellent finger sensitivity and dexterity.
